aftermarket rag conversion?

just wondering what is involved in converting the type 3 square into a ragtop, as what amount of work is needed and a ballpark figure on the budget.ive seen a couple and i have just fallen in love with ragtop squares

The hard part is getting one.

Dont know if they were a VW option though.

There are 2 types (generally) for rags
Golde's
Britaxs

Goldes are much dearer and generally better. A rough clip top would cost $1k then it needs to be repaired and installed.
These are welded in and structurally solid.

The Britax cost roughly 1/2 the Golde and are cut in and clamped/screwed.
As such they are no structural

Some one was selling a Type 3 Britax about a year ago.
Dunno if it ever sold. Youcould be lucky.
Do a search for Britax in Selling Parts and go digging

I got it in my shed 🙂
am still debateing putting it into Osama.

Also, look for a ragtop out of a 70's jaguar XJ6, as they'e a reasonably similar size and shape.

I was going to put this one in a Square back project but car fell through...
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&ih=002&sspagename=STRK%3AMESE%3AIT&viewitem=&item=120097224429&rd=1&rd=1
Rob.

:thumb Also the kool thing about this one is that its never been fitted

[ Edited on 14-3-2007 by robnjo ]

call me.