WTD help source 38amp alt fan tinware

wanting some tinware for my alternator, i have been told that i need the offset tinware from a 38 amp Alternator,
can anyone help me out, and a price if available. current setup does not line up against lower pulley.

there are different pulleys u can get eg kombi etcpls name the modeland Type we are talkin about...for id and roit ansa ha ha

i also did al ittle shaving at the front of the alt housing (metal lathe) for a yank one and took out some spacers in the fan shroud between the fan to stop rubbing

found I had the wrong pulley when i bought the engine almost complete. where are u
someone may look at it and help

i am nowra nsw

so it's a ruff bug... what mod engine (bug) ??

[ Edited on 28-5-2007 by bushed ]

You need the metal plate behind the alternator
which is different to the old generator type...
If You have ALL the doghouse shroud tinware
maybe its just a shim problem....

My Son [and I] both had to shim the pulleys on Our alternators....

I just happened to have some flat washers which fitted perfectly...

I see on some US websites for sale, special shims made for
the alternator and flywheel pulleys...

Best of luck

Lee Noonan

http://community.webshots.com/user/vw68autobug

Give Vintage a call or send the alternator up so they can fit the tinware correctly 02-9789-1777