WTB kombi motor 1776-1835

Thought I would put the feelers out for the above, strong turn key or longblock.

In Sydney area, 70, upright, kombi

Thanks

Wont bog down in detail - but an 1835 is thin walled 92mm cylinders. Not good.
These are 90.5's

You wont buy better

http://forums.aussieveedubbers.com/viewtopic.php?tid=62218&page=1#pid588674

Reckon he will move a tad as well

Will convert to upright.

http://forums.aussieveedubbers.com/viewtopic.php?tid=63596

Here is another

I will add both of these motors suit your application. As in you need a 1600 T2/T3 case that has the rear supports.

You need to add a special brace if your use a standard beetle motor.

The first motos is complete.
The 2nd needs a few things (carb etc)

Ring Rod. Dont just reply to the post. He is in Woolongong by the way