EJ20TT ecu pinout · Aussieveedubbers

junkyardoval · 22 Jul 2007, 12:26 pm

I need help. I have a 1997 Subaru 2.0 twin turbo engine. I need the ecu pinout so I can finish the wiring harness. It seems I have one unlike most. A link to photos. http://photobucket.com/albums/y257/smoky-joe/56%20Oval/

Any help would be appreciated.

Thanks

Ernie

BASHOdi · 22 Jul 2007, 3:11 pm

Try a post in the tech section on rexnet (also archives)when I had a wrx I was astounded at the stuff you could get links too , a bit of a longshot--- but---also try MRT.com.au and the liberty site would be worth a burl as well .

speedster356 · 22 Jul 2007, 3:56 pm

Also try http://www.rslibertyclub.org/forums/index.php lots of good tech help there.

junkyardoval · 22 Jul 2007, 11:22 pm

Thanks guys I will give it a try.

Ernie

junkyardoval · 28 Jul 2007, 10:26 pm

I got a reply back from a couple guys on the rslibertyclub site. One has the pinout and says he will send it along. Thanks guys. I will let you know.

Ernie

72RSbug · 29 Jul 2007, 6:20 pm

here's an ECU pinout for the '97 and '98 JDM EJ20TT engines

gazman · 2 Aug 2007, 1:28 pm

WHERE?!?

I have this pinout as well. I hope this link works:
http://www.geocities.com/gazman_4/wiringgallery.html

72RSbug · 2 Aug 2007, 9:11 pm

that is the same pinout I have but couldn't post my PDF file on here. (posted this in a reply a while back but apparently it dindn't show up on the forum)

junkyardoval · 8 Aug 2007, 8:42 am

I got my harness for enginewiring.com on Friday. We never found the proper pinout. But he thinks what we have will work. I have sent this info along to him. In about a week I hope to see if the harness works. After playing with this car for almost 5 years, if it runs you guys will hear me yelling all the way down under. I can't wait to push the start button. Thanks for the help.

Ernie