Aussieveedubbers · Tech Talk

plate on bottom of shifter?

https://forums.aussieveedubbers.com/threads/64005/plate-on-bottom-of-shifter

akean1 · 28 Jul 2007, 5:54 pm

wich way is this supposed to sit? there is a short and longer ridge (wich sits on left and right) and should these be facing up or down?

11CAB · 28 Jul 2007, 5:58 pm

The ridges should face up, and the longer one on the drivers side

greedy53 · 28 Jul 2007, 6:42 pm

oh shit the drivers side now i gotta do it again

akean1 · 28 Jul 2007, 7:40 pm

i had it right, was hoping it was wrong, i can slip into reverse without pushing down? any ideas on what causes that?

Bizarre · 28 Jul 2007, 9:02 pm

Just loosen the bolts and move base to the left a bit and retighten

Have a look here
http://www.csp-shop.de/cgi-bin/shop2/shop_main.cgi?func=start&wkid=8468127333

Down load the manual - page 5

akean1 · 29 Jul 2007, 2:20 pm

Bizarre wrote:Just loosen the bolts and move base to the left a bit and retighten

Have a look here
http://www.csp-shop.de/cgi-bin/shop2/shop_main.cgi?func=start&wkid=8468127333

Down load the manual - page 5

cheers , that sorted it :thumb

ancientbugger · 29 Jul 2007, 4:18 pm

Worth its weight in gold this forum👍