TYPE 3 NARROWED BEAM..?? · Aussieveedubbers

Tonz Magonz · 13 Aug 2007, 11:55 am

Wondering if anyone is doing a narrowed type 3 beam or advice on how to go about it...
Cheers Tony

vw54 · 13 Aug 2007, 12:03 pm

just about impossible

Would probally be easier to fit struts to the front and do away with the beam

Thye can be lowered releatively easy but not narrowed

Turbo54 · 13 Aug 2007, 12:15 pm

People are grafting type 1 beams, a lot easier. Look on the samba.com
T54

Stanley · 13 Aug 2007, 12:33 pm

http://forums.aussieveedubbers.com/viewtopic.php?tid=49229&page=1#pid458717

vw54 · 15 Aug 2007, 1:00 pm

People are grafting type 1 beams, a lot easier

yeah that would be the answer

vw54 · 15 Aug 2007, 1:01 pm

no matter which way its LOTS of work 4 sure

penguin · 15 Aug 2007, 6:27 pm

Only heard of one, that was in a UK VW mag a short whole back.
Reckon Dave is right, go a type 1 beam.

Tonz Magonz · 17 Aug 2007, 1:48 pm

Wishful thinking but was hoping not have to re-invent the wheel,so to speak,,so am looking for someone who has or is doing the type 1 conversion at the moment.
Thanks to all so far.... Tony

dragbug · 17 Aug 2007, 3:14 pm

I have been doing these for a while now.
One of my type 3's has a 4inch narrowed front and sits flat on the ground.
They are almost ready for distribution .
Call me at "Old School Kustoms" on 0420 972 129.
Cheers.

vw54 · 17 Aug 2007, 4:15 pm

One of my type 3's has a 4inch narrowed front and sits flat on the ground.

any pics of the project sounds good

dragbug · 17 Aug 2007, 5:06 pm

Here is the thread for the Notch.
Just tryn to get pics up.
Cheers.

http://forums.aussieveedubbers.com/viewtopic.php?tid=64418

Tonz Magonz · 18 Aug 2007, 8:55 pm

Thanks Dragbug...Looking forward to the pics.
Will call soon...
Tony