Horse power to expect

Just wanted to know ballpark figures of HP to expect from a 1916 and a 2300 stroker? I know it depends on a whole lot but I just want an idea assuming a balanced everything, a twin IDF setup, 40x37.5 valves and a mild cam. Preferably want to hear from someone who put their engine on a dyno
Thanks
Raf

[ Edited on 27-8-2007 by karmannghia60 ]

1916 about 80 , 100 on the stroker also more torque

There are some dyno'd and driven specs here -

http://www.johnmaherracing.co.uk/performancesummaries.htm

Good info, thanks

Engine Type 1, 2007cc
Cam Engle FK87
Carbs Weber 48 IDA x 2
Heads Super Flo (44 x 38mm)
Compression Ratio 10.7:1
Max BHP 190.5 @ 7000rpm
Max Torque 154.2 ftlbs @ 6000rpm
Ring & Pinion 4.12
Gear Ratios 3.78/2.35/1.56/1.19
0 - 60mph 3.5 secs
1/4 mile 12.2 @ 109 mph

oh...my...god my mates turbo skyline isnt even running 3.5 0-60 and 12.2 1/4 🤪🤪🤪

i like the results of the engine at the bottom 😎

here are some motors with HP

http://www.geocities.com/enginecookbook/menu.htm

bigrudi wrote:1916 about 80 , 100 on the stroker also more torque

But your 1916 produced more HP than your 1998 stroker.

127hp for your 1916
115hp for your 1998

Or is this not the case?

[ Edited on 6-9-07 by Craig Torrens ]

Craig,

Do you think that if you had a 1916 making 100HP and replaced the 69mm crank with a 73mm crank and increased the ccs on the head to keep the compression the same then put the thing back together with no other changes that it would make less HP?

If so what would you attribute that to?

BTW I could only find 1 7 inch cookie. I must've ate the other one. But I do know a guy who has 4 that you could have for $50 each. U2U me if you're interested and I'll pass on his phone number.

Regards CT

karmannghia60 wrote:Just wanted to know ballpark figures of HP to expect from a 1916 and a 2300 stroker? I know it depends on a whole lot but I just want an idea assuming a balanced everything, a twin IDF setup, 40x37.5 valves and a mild cam. Preferably want to hear from someone who put their engine on a dyno
Thanks
Raf

[ Edited on 27-8-2007 by karmannghia60 ]

Cheeck the Dyno thread, Jak Rizzo has put up all his Dyno charts with the changes he made............good for researching combo's.:thumb

Yeah Jak's comparison is pretty good. It shows the horspower per cc says pretty much the same.

2275cc / 1880cc = 121%

108.8HP / 90.4HP = 120%

The comparison would be more interesting with some bigger heads than the mildly ported 40 x 3? 040s.

there is a cookie cutter on ebay for $50 atm.

nick