what are my exhust and extractor options for a t3 wagon to get the best sound and performance?
what do they sound like with a sports exhust anyway???
type3kid ·
Aussieveedubbers · Tech Talk
exhust options?
https://forums.aussieveedubbers.com/threads/6481/exhust-options
empi ·
hEY I HAVE 2 NOS STOCK ONES FOR SALE .
SEE MY AD IN THE BUYIN SELLIN N SWAPPIN PAGE,
EMPI
SEE MY AD IN THE BUYIN SELLIN N SWAPPIN PAGE,
EMPI
vw54 ·
Not to many if your driving a Type 3.
Theres only one header available but you can alter the length and design of the muffler..
if your willing to pay for it.
Theres only one header available but you can alter the length and design of the muffler..
if your willing to pay for it.
pyr0 ·
if u live in sydney try sure flow exhaust they've got some kool set ups for the bugs and busses
OvalGlen ·
Gee I thought that you could buy any Type 1 Extractors and get a Good sports Exhaust Shop to alter it to sit under the back with the Muffler that you choose.
Not too quiet if you want the good performance. I like the throaty sound of a Free flowing 2 inch muffler. ( Glass Pack - oval outside ).
Not too quiet if you want the good performance. I like the throaty sound of a Free flowing 2 inch muffler. ( Glass Pack - oval outside ).
vw54 ·
Glen
Its a TYPE 3 and the extractors are different to a Type 1
Its a TYPE 3 and the extractors are different to a Type 1
Gee I thought that you could buy any Type 1 Extractors and get a Good sports Exhaust Shop
type3kid ·
where do you get the thunderbird's and how much are they roughly?
how does a 2.5 inch system sound
how does a 2.5 inch system sound
whatnow ·
type3kid, there was a set of t3 extractors in the trading post (syd) for $75
http://www.tradingpost.com.au/
hope this helps.
btw, a 2.5" extractor would bite on anything less than a HUGE motor with monster valves etc.
if you are running a standard valved motor stick with something small - 1 3/8, 1 1/2. a big exhaust will kill you exhaust gas speed, prob stop the extractors from scavaging properly and basically make the bottom end soggy.
http://www.tradingpost.com.au/
hope this helps.
btw, a 2.5" extractor would bite on anything less than a HUGE motor with monster valves etc.
if you are running a standard valved motor stick with something small - 1 3/8, 1 1/2. a big exhaust will kill you exhaust gas speed, prob stop the extractors from scavaging properly and basically make the bottom end soggy.
NigeType3 ·
Hi I have just put a thunderbird extractor system on my T3. It came with a mufler all up $450 fitted. I only run a 1640 with a Eagle 110 cam, stock twin carbs runs real nice, sounds Ok to.
Nige:thumb
Nige:thumb