Aussieveedubbers · Buying, Selling & Swapping Parts

[F/Sale QLD] 1off Complete Type 4 2litre [SOLD]

https://forums.aussieveedubbers.com/threads/65790/fsale-qld-1off-complete-type-4-2litre-sold

OZ Towdster ·

Seller ~ Andrew Westwood
Location ~ Alexandra Hills QLD
Price ~ $1800
Contact # ~ 0407373781
Item ~ 1off Complete Type 4 2litre ,This motor comes fully complete from 2ltr clutch to air cleaner as pulled from my wifes 77 Kombi and is also still available for a test drive till next thursday 1/11/07.It is also fitted with a nice extractor system and mufflers etc(sorry no heater boxs fitted for you southern folk so no heater) and has 1800 heads fitted for the bigger valves.
So if your looking to upgrade that old 1600 bay or just need a fresher motor this is for you and for a few extra dollars i'll even fit it for you (IF YOUR IN BRISBANE ONLY)
Once removed from vehicle i will also run a full compresion test and post results but from the recent Dyno day i should think they will be quite good considering it produced 52.4 rwhp

11CAB ·

I've driven this, and it pushes along a set of 33inch tyres very nicely. Are you sure its only a 2L Andrew?

OZ Towdster ·

Bump

Brad ·

I'll give you $500 if you fit it to my beetle

11CAB ·

Thats $500 for the fitting Andrew....on top of the $1800 purchase price.... 😂

OZ Towdster ·

Fitting in a Beetle will require a Upright Kit too which i just happen to have and i'll let him have that as well for an extra $550

Andy ·

Will it fit a 411?
😏

Brad ·

Andy wrote:Will it fit a 411?
😏
Yep but the tinware will be different

Andy ·

Buggy Brad wrote:
Andy wrote:Will it fit a 411?
😏
Yep but the tinware will be different

Hehehe,
Loaded question mate, it won't fit mine 🙂
'68/'69 type 4 case is different.
Not that hard to modify to fit though.

Brad ·

Andy wrote:
Buggy Brad wrote:
Andy wrote:Will it fit a 411?
😏
Yep but the tinware will be different

Hehehe,
Loaded question mate, it won't fit mine 🙂
'68/'69 type 4 case is different.
Not that hard to modify to fit though.
Nothing loaded about it, take off teh tinware and it will fit in the back seat just fine.

MickH ·

Leave the tinware on and it will fit in the front boot...just get it for a "spare" Richard...😂

Andy ·

There's always this week end Andrew!

Bumperoo