DTM cooling kits type 1 and type 4

Hi all, late last year on my way back from Canada, i had the opportunity to vist Jake Raby and his business Aircooled Technology in Georgia. During my visit i bought a 2270 engine kit form him and we got talking about me becoming a distributor for his parts here in OZ, he agreed and has been thinking about this for a while. I spoke to Jake last week about my kit and he asked if i wanted anything else sent down, So Jake would like to send 6 DTM kits down to me, both type 1 and type 4, if anyone is interested let me know and i will put your name down. Now i won't be paying for these with my money so if i can get 6 people to puchase one each i can get a discount price on them. I don't know how much discount it will be until i can confirm with him that he can send six kits. After this deal if it goes well i will be able to bring more of his parts to distribute and sell. The type 1 kit is just the shroud and utilizes your stock type 1 sealing tin and uses a type 4 oil cooler in place of the little type 1 unit. it is a direct bolt up to the type 1 engine, the type 4 kit comes in for stages of version 1 and there is a version 2 which does not use an oil cooler in the traditional position, these V2 kits are ideal for upright conversion in split and early bay bus conversions. If anyone is interested let me know as my 2270 kit will be ready by in about three weeks. I am not trying to make a buck just want to help my fellow dubbers out, anyway let us know.

Cheers Damo.

Here are some photos of the type 1 DTM as you can see all you need is your original engine bay sealin tin.

How much Damo as i may be interested in the type 1 sytem for my Towdster 2387 , pm me if you like

How much for the type IV V1 & V2, and what do you get?
Matt

I'd also be interested in a Type 1 depending on what the price is like...

This is a photo of my stage 2 kit that i have had for a while now it contains what you see here and a full hardware kit to install sealing tins that you have to make or can buy pre cut.
The price are: Type 1 $559 US, V1 Type 4 Basic $689 US and V2 Type 4 $435 US.

Here is a link for full product http://www.aircooledtechnology.com/store/home.php?cat=248

Damo.

damo,

will buy 1x type 4 basic @ $689usd please 🙂

pm me your bank details and will wire $ asap

nick

are the prices right ???? V2 cheaper than the V1 ?

Put me down for 1 of each................let me know when I have to pay 😉

craig - v1 is ther version of make not the stage of kit.

v2 doesnt have the oil cooler housing with airducts etc from memory.

so how much for the kit that you have ?

Damo - put me down for 1 x Type 1 then pls.

Hi Damo,
Count me in for one of the type 4's as well. I expect you will need the external oil cooler for the 2270cc so you don't need internal anymore is that correct? If so, just put me down for the correct one and pm me if you need to confirm anything.

Cheers

Yogie

I have emailed Jake tonight about everyones interest i will let you know more details when i hear back from him, Craig my kit is not for sale, its numbered to me and i have the certificate to say i am the owner, you also get an install DVD with each kit.

Damo.

I think craig was asking how much for the same kit you have. not how much you would sell yours for

ang3lsholocaust wrote:I think craig was asking how much for the same kit you have. not how much you would sell yours for

cheers, yes that is what I was asking.........how much for the complete kit pictured (not your actual kit!)

Sorry bout that, i paid $700 US about 2 years ago. Also i will be speaking to Jake tonight and get more details.

I will be leaving for Melbourne this Sat morning and be back Tuesday afternoon so please don't worry if i don't reply over weekend, but i will try and get to a computer.

Yogie i would get the V1 Basic which uses the cooler at the back this will be enough for 2270, and you could also full flow the case so you can add an external cooler if need be.

Damo.

Thanks Damo. Let me know when you will need the money.

Yogie

Hi all, just got back from Melbourne, I spoke to Jake on Friday afternoon and also with Charles from LN Engineering. Jake said he has the kits already on the shelf, i have a total of 5 sales 1xtype1 and 4 type 4 basic kits, Craig do you want one of each still a V1 with the oil cooler duct and a V2 without? if i can get 4 more sold shipping will be way cheaper. As for payment, i will pm you all with my account details and will make the purchase, will get an email from Jake with shipping charges and let you know.


Damo.

What I want is: 1x Type1 motor kit using the existing cooler (replaced with a type4) and 1x Type4 V1 complete motor Kit (stage 2 like yours) that has the cooler mounted on the back.

Prices for the above please !😁

i would imagine prices to be the same as that online craig? unless damo is cutting a deal with jake? = discounts??? 🙂

type 1 kit is $559usd
type 4 basic stage II $729usd

nick

Hi,

I am keen on ordering a type4, V1 or V2?? as I am looking to do a type4 conversion on my early bay. Do you know how much the pre-cut tin-ware is or do they come with templates? I have pm'd you also. Don't want to miss the boat

where would the items be delivered? is it extra to melbourne?

cheers
michael
0438 535 865

Hi Michael, i would go with the V2, and you will need to run an external cooler, i will recheck with Jake about the V2 in a bus. As for shipping i will have to send it down to you, as they will all be delivered to me in Brisbane. Craig the prices are what Bond posted $559 US for the type 1 and $689 basic type 4 shipping will be approx. $200 US for each kit sold at the moment may be cheaper.

Damo.

shame we cant make fibreglass moulds off your kit damo?

save shipping etc.

nick

Oh, plus $200us postage per item..............I think I will pass 👍 SORRY.....(or maybe just buy the t4 kit...)

I thought Jake was wanting to send the kits to Aus to promote them.................not charge us the same as ordering direct from him !!

$200 US for shipping per kit - ouch !!!

Is that really what it's likely to be Damo ???

Its not the shipping thats expensive !!!

Hi Damo,

V2 sounds good. What would the overall price be in $A? Did you find out going into a bus and the tinware templates?

cheers
michael

A V1 will fit a bus as long as it has not had an accident in the rear end, the bus tin is not available you would have to fabricate it from existing bus tin, $200 Aus for shipping is what i paid 2 years ago, still $1K cheaper than buying the 911 kit from the business here in OZ, i know cause i bought one didn't fit properly and i paid over $2K for it, thats why i sold it and bought the DTM, Shipping will be roughly what i quoted but may be cheaper if several are purchased customs should not be a problem as i spoke to Charles from LN Engineering who sends his nickies cylinder kits to a melbourne porsche specialist and as long it has mande in the USA it gets through because of our free treade agreement with the US, i can order them under my business name which will help also.

Has anyone got some pictures of these fitted to a split bus.