I have alot of late type 3 parts and panels if anyone is interested , i've wrecked about 5 in the last 2 years mostly wagons and i have kept everything but the shells.
Will start posting pics in for sale section , some early cars will be up for sale soon aswell 66 fasty , 65 notch, late 68 wagon (still early shape but 4 stud swing axle , externall filler flap) and a crappy front hit 66 wagon can be fixed , there is a 73 wagon complete very crusty looking but solid with lowback seats (its on a 71 rustfree pan ) anyone wants pics of cars before i post pm me or call 0428 427 986 klaus . everything is in wollongong
satori ·
Hi, do you have any interior stuff (door panels and seats? after a pair of low back front seats. Thanks
jakejakesnakes ·
Hey Klaus,
you wouldn't happen to have indicator switch for a '71 type 3?
thanks
telf ·
Hi im after a section of floor for drivers side of a 71 square from just under the front seat to the battery tray
am also after a set of 1600 carbies
if you can do either how much are you looking for
Thanks
Telf
bus914 ·
Manual IRS drive shafts and complete IRS subframe? Pix of fastback panels also please bus914@hotmail.com
Klaus ·
fastback panels are the same as wagon . think there is pics of stuff in for sale section few pages back.
Should have ind stalk .
I do have a few subframes but am running low on drive shafts and arms with brakes on them.
Unity-28 ·
Hi Mate, you got any good Stock Mufflers?
type3kid ·
hey Klaus.
do you have any complete type 3's?
Volksgirl is looking for one.
cheers
aaron
Klaus ·
only one that is any where near rego is 73 wagon, needs a motor other cars need work. got a daewoo for $500
type3kid ·
thanks anyway dude,
i know she'll pass on the Woo, she has a car to run around in, just wants a type 3
Petey ·
Hi Klaus,
I PM'ed you but I'm not sure if you noticed. I was looking for the steering column from a 70 or 71 type 3. Would you have anything lying around?
Pete
Klaus ·
havent been on comp for a few days but pm replied to petey , i do have one or two.
izac ·
hey klaus, just wondering if you have any decent early RH front fenders or LH rear fenders for early square ('65)? also looking for a pair of side view mirrors?
cheers
izac
JimmyH ·
Hi klaus, what kind of condition is the 65 notch in?
Klaus ·
may have a front guard but its got dents , the 65 notch needs a new pan and a bit of rust repair but i have a spare good pan from a "70" model which will bolt straight up amd a complete front clip for winscreen repair sections and also a complete rear clip for parcel tray and rear seat repair sections . car is complete with motor just needs some lovin has all chrome and int. if your interested i'll let it go for a 1000 with pan and rust repair bits. call 0428 427 986.
electricmonk ·
Ok It's been a while since this was active but wondering if you still had any parts. I am currently rebuilding the front end on my 72 and will need most rubbers to mount the suspension unit to the body and possibly both lower control arms
Thanks
JAson
Klaus ·
still got bits been doing some sorting and i do have front rubbers but as expected their not perfect, got about 7 front ends and one i'm using for parts if still needed pm me or call 0428 427 986
Newt ·
Howdy,
Probably not appropriate, but looking for rear floor sections (left /and also right) from a type 3.
Also wagon rear brake assemblies.
I am in Kalgoorlie - which puts me a long way from most people.
Cheers
Newt
mobbug ·
any type 3 auto trans
slippy ·
How about a driver's side sun-visor?
3andeasy ·
hi,im after a drivers low back seat,red would be good but any colour will do as mine has snapped in 2!!,to fit a '70 squareback,cheers
Klaus ·
no sunvisor , seats hard to get a good one , to section a floorpan gets pretty fidley depending whats rusted out . lots of seams and spotwelds. Most of the floorpans i have are to good to cut up .
crewcabconnection ·
I want a complete motor and passenger mirror for 72 fastie
braken ·
Would you have a late type3 (1970)horn ring or complete steering wheels,And working speedo.thanks.