Aussieveedubbers · Buying, Selling & Swapping Parts

T3 Transporter parts 4 sale, more parts added

https://forums.aussieveedubbers.com/threads/69237/t3-transporter-parts-4-sale-more-parts-added

Menangler ·

I have a few of these vans in the back yard that I am parting out, a few parts I have available are.
Good 5 Speed Gearbox $800.00 sold
Good radiator $200.00
Roof Air Conditioning kit complete $800.00 you remove!
Caravelle Seats without arm rests in black fabric, $200.00 pair, one has a small hole in base, padding is great.
Tracker Rear folding bed seat complete with belts and Z bars $450.00.
Middle seat in black fabric, with mounts and belts $200.00
Rear seat in Black fabric with belts and bolts $200.00
Black door trim set front and back, (have speaker holes) $150.00 the lot.
Lots of 2.1 litre engine bits, cranks, rods, piston and barrells, good AMC heads, stock german heads. 2.1 distributor, tripple belt engine pulley, EFI stuff, air cleaners, Alternators, exhausts, plus lots of bits and bobs, let me know what you need.
I am in Nowra NSW phone 0402 003965
Dave

Bizarre ·

Wracking my brain - trying to think what i need

Bump

Special Air Service ·

PM for both you guys.

Cheers
Brendan

touringtess ·

Do you still have the Tracker Rear folding bed seat complete with belts and Z bars $450.00.
could you please post a picture, or maybe send me a picture
Cheers
Tess

Craig Torrens ·

any wbx cranks ?!

Menangler ·

How many cranks do you want Craig?

Tess, I still have the seat, I have attached some photos. it has a small split on the top of the back rest, this will be easy to stitch up, and a dirty mark on the seat base, this should clean off with appolstery cleaner.

ash1965 ·

Hi Dave,

Can I see some pics of the black fabric seats? I am interested in the fronts and centre row specifically.

Thanks

Menangler ·

Ash,
Here are some photos of the seats, they have not been cleaned at all as you can see, I just picked the van up, it has been sitting for a while, and it's a mess inside, seats are good except for a small hole in one seat base and the piping is missing off the rear one, see photo. The dirt will clean off easily.

Menangler ·

Also have an nice Black Alloy bull bar, $200.00,
2.1 Engine with AMC heads $1200.00 hear running in van.
Rear towel rail set $120.00
Front Chrome Bumber with rubbers, $150.00
Square Headlight set, $200.00
Grill to suit $60.00
Tracker Sliding Windows in Black $250.00 (use stock rubber)
Genuine VW sliders $400.00
Rear tow bar $100.00
I will pack and post smaller stuff, large items can be road freighted if you have an account with a freight company, I don't have time to get quotes.
Or come for a drive to Bomaderry, easy 2 hr drive from Sydney.
Dave
0402 003965

Craig Torrens ·

Menangler wrote:How many cranks do you want Craig?
.
just one !

Will be down your way in a couple of weeks, will give you a call before I come down.

Menangler ·

No worries, give me a day or so notice, I have to pull an engine down to get one out for you.
Dave

Menangler ·

I have a crank out ready to go if you still want one Craig.

The_Bug67 ·

Have you sold the rear fold out bed seat?

Menangler ·

It is sold pending payment, If it is not finalised by the end of the week, It will be 4 sale again.
Dave

66deluxe ·

Dave how much for a 2.1 76mm crank, 2.1 case, rods and flywheel, thinking oxy boxer for my 71 dualcab.

Cheers Damo.

Menangler ·

Dao,
Crank is $350.00 with flywheel, good case is $200.00, you will need to use Beetle rods so the gudgeon pin is the correct size for a Type 1 Barrell kit, 22mm not 24mm as on the WBXer.
Dave