Brad ·
Anyone got any specs on what offset / size wheels I can fit under a stock L Bug Guard ?
Aussieveedubbers · Tech Mods and Frequently asked Questions
What offset wheels fit an L Bug ??
https://forums.aussieveedubbers.com/threads/69922/what-offset-wheels-fit-an-l-bug
1303Steve ·
Hi
On the rear, same as any bug, a 7 with a 23ET works OK. I have 7s with 55 et on the front of my car but need to run skinny struts.
Steve
On the rear, same as any bug, a 7 with a 23ET works OK. I have 7s with 55 et on the front of my car but need to run skinny struts.
Steve
Brad ·
Ok anyone local carry skinny struts ?1303Steve wrote:Hi
On the rear, same as any bug, a 7 with a 23ET works OK. I have 7s with 55 et on the front of my car but need to run skinny struts.
Steve
I have some 8" M3 mags I was thinking of using which are ET23 but thinking 8" is to much up front
1303Steve ·
Hi
Vintage and V force have them but I've seen people use some sort of Honda rear spring on the front with Beetle struts.
Steve
Vintage and V force have them but I've seen people use some sort of Honda rear spring on the front with Beetle struts.
Steve
mackaymanx ·
L Bug with 'negative roll radius' should have 41mm offset on the 4.5J rim
1303Steve ·
Hi
Vee Dub engineering in Canada sell these kits http://www.vdubengineering.com/products/narrowcoil.htm
Steve
Vee Dub engineering in Canada sell these kits http://www.vdubengineering.com/products/narrowcoil.htm
Steve
Brad ·
thanks, I will fit up the 8" and see how they look and clear and if it is just the springs that stop me I will change them out
Joel ·
depends what model Lbug
the 2 bolt struts ones (74 on) have a 15mm wider track on each side
i got 17x7 et40 on mine that tuck nicely but its got 3 bolt earlier struts and narrow coils
the 2 bolt struts ones (74 on) have a 15mm wider track on each side
i got 17x7 et40 on mine that tuck nicely but its got 3 bolt earlier struts and narrow coils
Brad ·
mmmm ok I have a 75 R&P shell I am looking at using. Just checked my 18's but they are ET 12 ... not real good ...
1303Steve ·
Hi
On my old yellow 1302 I ran 17 x8s with 11ET I needed to run wider guards to fit them under.
Steve
On my old yellow 1302 I ran 17 x8s with 11ET I needed to run wider guards to fit them under.
Steve
Brad ·
Steve, so they were ET 11 anf fitted but needed more guard ? Any scrubing ??1303Steve wrote:Hi
On my old yellow 1302 I ran 17 x8s with 11ET I needed to run wider guards to fit them under.
Steve
1303Steve ·
Hi Brad
They just touched on the rear of the inner guard on full lock.
Steve
They just touched on the rear of the inner guard on full lock.
Steve