After crashing mums bus its time to part it out. The bus was hit in the front right hand corner damaging front bumper, right head light, and drivers door and some other things in the area. Is also with out a motor now.
The bus has good:
*Gen vw mats through out
*Gen vw sliding windows on both sides
*Deluxe microbus steering wheel
*Good door cards and interior
*middle seat in average condition
*Glove box and lid
*dash
*Auto gear box which was working fine
*windows and rubbers
*passenger door and sliding door
*Bilstein steering dampener
And anything else you can think of just give us a call!
Would prefer people to ring as sometimes i dont check AVD for a few days, thanks
please call Richard holzl at V-Force on:
9743 1247 or 0408 991 247
cheers, Alex
splitbus07 ·
i know its a tad late, but do you have the rubbers for around all the windows???
Alex
Too late to call you now but will do so in the morning however, I'd like dibs on the sliding windows please.
Cheers Bob in Perth
specimen ·
Hi Alex. I'm interested in the right side sliding window if it fits the center spot & is full length. Could you give me a prise & postage to melb please. Tony.
Alex Holzl ·
splitbus07 wrote:i know its a tad late, but do you have the rubbers for around all the windows???
Hi pig to get out. hows 200 sound? but wont be for a lil while till the motor comes out.
Alex Holzl ·
specimen wrote:Hi Alex. I'm interested in the right side sliding window if it fits the center spot & is full length. Could you give me a prise & postage to melb please. Tony.
Yep fits the center window and is full length, $250 and 35 pack and postage and insured.
specimen ·
Thanks Alex but I reacon your price is too high. Can you give me a better deal. Tony.
LIFE IN THE LOW LANE ·
PM sent with a list of bits Alex.
h ·
pm to you.. taa
splitbus07 ·
PM sent about the rubbers
cheers
splitbus07 ·
can you please post some pics of the van
im sure ill see some shit i need
Alex Holzl ·
Hi i am tryin my best to relay the msgs to Richard holzl but like i said could you please ring Richard on 9743 1247 or 0408 991 247 as i dont get much of a chance to get on here. sorry all
splitbus07 ·
bump
splitbus07 ·
BUMP BUMP BUMP
splitbus07 ·
BBBBBBBBUUUUUUUUUUUUUUMMMMMMMMMMPPPPPPPPPPPPPPPPP
Kuchster ·
I need a 2.0L starter motor.
Any chance?
Kuch
Brad ·
specimen wrote:Thanks Alex but I reacon your price is too high. Can you give me a better deal. Tony.
If they are "Original Factory" sliders they usually pull $350 a side. You can get "New" ones but they are not the same as original. At $250 and cheap postage I would say that price is very reasonable.
greedy53 ·
what colour are the inside cards and other pallels