i still have 4 left and realy wish to do a big clean up.
i wll also be getting rid of heaps of other stuff cheap but i haven't had any free time to take pic's.
they are 1 5/8 304 stainless steel merged headers.
i will be letting them go for cost,i realy just want to off load them to clear some room up as my shop looks like a pig sty.
silly price $132 each gst inc
or 120 cash each
grogy ·
hi , i take one, where n how do i do pick up n pay u. regards grogy
Dasdubber ·
Hey Brad, I'll take one. Will PM you.
Cheers
AL
cbbvw ·
I ll take two westi
Regards
Mike
whatnow ·
if one of these guys drops out i'll take one
henry.
squizy ·
Damn - the quick and the dead. I'm behind Henry.
westi ·
i found a few more at home so there are a still some left.
i don't know how many so just pm me if your interested.
LIFE IN THE LOW LANE ·
Damm good price Westi!!
now to find some Type 4 stuff stashed away in the corner of your workshop......
hellbugged ·
yeah, a set for me too westi if you can pop them in the post (done it before ok)
LUFTMEISTER ·
p.m sent mee tooooo
66deluxe ·
LIFE IN THE LOW LANE wrote:Damm good price Westi!!
now to find some Type 4 stuff stashed away in the corner of your workshop......
I spoke to Westi at Valla about type 4 exhaust systems, he needs a bug with a type 4 engine in it to do a system.
westi ·
so we will need a doner car for the first set.
as for the stainless i did find a few at home.
humpty ·
Any left Brad?
westi ·
pm's sent,
let me know who need's postage as i am doing a few run's down to the post office this week.
i will cod post them if needed.
humpty ·
pm replied Brad...
aintgotitmusthaveit ·
pm sent too!
Craig Torrens ·
these are a fantastic price 👍
Fatso ·
Dang, if you keep tripping over something to suit a type 3 let me know.
Drinky ·
Fatso wrote:Dang, if you keep tripping over something to suit a type 3 let me know.
x2
hellbugged ·
Drinky wrote:
Fatso wrote:Dang, if you keep tripping over something to suit a type 3 let me know.
x2
X 3
mactaylor ·
maybe a sidewinder next?
reub ·
I've already offered a poor quality one for a jig 😉
Gracey ·
I'd be interested in a quality Australian made sidewinder.
humpty ·
Business is booming Brad.... Just remember us little guys that got you where you are ok?
🙂😂
matberry ·
Gracey wrote:I'd be interested in a quality Australian made sidewinder.
I'd change my order to one of these if ya gonna make em. 🙂
westi ·
nah not yet way to much on my plate.😢
aintgotitmusthaveit ·
got it today thanks west
westi ·
no prob's
LUFTMEISTER ·
got mine too today.👍 I hope the other c.o.d's go better than ours. he just left the carton outside our door. no payment, signature or anything? did not get to post office today, so will pay tomorrow. Cheers
Dasdubber ·
Got mine delivered yesterday thanks Brad - headers look great mate!
Al
Craig Torrens ·
yeah picked mine up as well..........good to meet you Brad.
If you need a donor car for making type 4 exhausts let me know. I can give you one of my projects as a "jig car"......has a type 4 motor in it already 😎
westi ·
it's always good to put a name and face together.it was good to catch up,as for the type 4 i will proberly take you up on that.not yet but soon.
it is good to hear that everything is turning up ok.some time aussi post can be alittle slack.
Unity-28 ·
hellbugged wrote:
Drinky wrote:
Fatso wrote:Dang, if you keep tripping over something to suit a type 3 let me know.
x2
X 3
X4 and X5.......
NuZo ·
pm sent
westi ·
pm sent
Peter_D_C ·
Unity-28 wrote:
hellbugged wrote:
Drinky wrote:
Fatso wrote:Dang, if you keep tripping over something to suit a type 3 let me know.
x2
X 3
X4 and X5.......
X6
westi ·
isn't there anything avaible for type 3's,
classic would surely have something wouldn't they.
66deluxe ·
Craig Torrens wrote:yeah picked mine up as well..........good to meet you Brad.
If you need a donor car for making type 4 exhausts let me know. I can give you one of my projects as a "jig car"......has a type 4 motor in it already 😎
Thankyou Craig for offering this cause after seeing Westi's car personally i know he can make it happen.
Craig Torrens ·
always happy to help 🙂
Ramblerman ·
Just wondering if these fit Type 3, thanks, Ron
humpty ·
Ramblerman wrote:Just wondering if these fit Type 3, thanks, Ron
Only TI engines.... Oh... And the WBX too...
You get mine in the post Brad?
westi ·
not yet,
aussi post sucks.
humpty ·
No rush mate...
Hutcho ·
Hi Brad.
I used to drive past your workshop every day to/from work when I lived in Padstow. Always meant to pop in but my lazy ass never did...
Ill be looking for an exhaustmuffler setup for an EJ20 powered Notch very shortly. I have the standard headers and a set of modded/shortened wrx headers you can use...you able to help?
Or are you just too busy.
PM me if you like!
Cheers,
Steve
westi ·
best thing to do is pop down with what you have,give us a look and we will be able to organize something.
baywindowbandit ·
Hi Westi do you still have any of these stainless headers left at that fantastic price?
HARRY QT ·
Hi just wondering if you have any of those headers left would love a set Could you please e mail me your address I am at harry@queenstown.co.nz or +6427332685 Cheers
westi ·
pm sent
Ampdub ·
Wow , I mean WOW. mine have arrived and do they look the stuff or what. nice and thick walls and great welding job, bends fantastic, cant rave about them enough.
just need to check fitment as going in a split, as soon as i get help to lift my motor off the stand. will take pics to show how much they stick out. just for future sales to split owners
thanks again.
VWCOOL ·
Got mine Westi, too cheap, thanks for the mail order!
Calcool ·
Hi Westi,
Any left?
I can come aroundand pick them up.
Cheers,
David
0434 58 22 64
westi ·
what's her name,Mail order.
i sent extractors not a mail order.is she pretty.
you should probebly send her back if she is good looking,i will resend you some headers in exchange.
i crack me up.lol
westi ·
who wanted me to bring some to warwick
BrisDubba ·
Bring a set for me to Warwick- will PM you.
Cheers
Peter
Sides ·
Hey Westi - you got anything from the collector out to make it a complete system ???
A fatboy is the obvious setup to throw on, but really need something a bit quieter (one of the tracks here has a 92dbA limit, and a fatboy will go over that)
Figure no harm in asking...
hellbugged ·
me too sides...........something that flows, is phat and reasonably quiet
BiX ·
Me three....
Any extractors left westi? Can arrange pick up from warrick......
NullaDub ·
So where exactly is this shop of yours ???? I would like to drop by and see what else you have kicking around you need to clear out. 😀😀
vassy66T1 ·
Hey Westi
I will be wanting a set in Warwick ... Ta
Marcus
westi ·
still have a few left i took them up to warwick but didn't get a chance to let anyone know as i was under the car all weekend.bummer.luckly i had heaps of fun thrashing the junka.
for anyone that wants to pop in and see what else i have.you all welcome.
unit 1 /13 watson road padstow 2211. 97737244.
humpty ·
So Brad... Can you knock together a Fatboy for the zorst? Been trying to get hold of George, but no luck so I gotta ask mate... I need one asap but the US Postal Service has gotten very greedy of late!
hellbugged ·
humpty wrote:So Brad... Can you knock together a Fatboy for the zorst? Been trying to get hold of George, but no luck so I gotta ask mate... I need one asap but the US Postal Service has gotten very greedy of late!
me too!..........but a nice quiet one
westi ·
i could but you will have to wait aliitle while as i have a full shop.running alittle behind at the moment.story of my life.lol.
i still haven't even pulled my car of the trailer as there isn't enough room for car and trailer.
how urgent are they
hellbugged ·
no hurry here...........but would be nice some day when you've got time
humpty ·
westi wrote:i could but you will have to wait aliitle while as i have a full shop.running alittle behind at the moment.story of my life.lol.
i still haven't even pulled my car of the trailer as there isn't enough room for car and trailer.
how urgent are they
I'm trying to get the POS together for the street drags and VW show at the end of November... I'd love to have the (long running) turbo build up done, but things have delayed that so I'll prolly be running NA with that beautiful zorst I just picked up... Long story short... If the turbo doesn't make it, how long will it take to make up a muffler?
westi ·
the age old question,how long is a piece of string.
depends on what i have on at the time,but it wouldn't take to long.
cnfabo ·
sorry 4 the intrusion, but me too. have to race humpty.
humpty ·
chris fabian wrote:sorry 4 the intrusion, but me too. have to race humpty.
Bring it on buddy... 😘
Hermann is gonna try to make it too!!!
cnfabo ·
our NA motors will look like there going backwards compared to hermans. lol.....
westi ·
pm's sent
Sides ·
Hey Westi, if the PM's were about setting up something from the merge back through a muffler... like a fat boy or something.... could you send to me too pls ???
choppa ·
Hey Westi, im a little late on this but, ive just spied the SS merge u sent Humpty.
Do u still have any left? If so ill take one.
Ta
westi ·
for anyone that has sent me pm's.i have been on mars,sorry .work is nuts but the light is at the end of the tunnel ,i am shore of it.
if anyone was after some there are a few left,
ringing is best, but i will return pm's.
9773 7244.
VWCOOL ·
hellbugged wrote:
humpty wrote:So Brad... Can you knock together a Fatboy for the zorst? Been trying to get hold of George, but no luck so I gotta ask mate... I need one asap but the US Postal Service has gotten very greedy of late!
me too!..........but a nice quiet one
yeah me too - to suit your pipes; the Phats I have here have the flanges at all funny angles...
humpty ·
VWCOOL wrote:
hellbugged wrote:
humpty wrote:So Brad... Can you knock together a Fatboy for the zorst? Been trying to get hold of George, but no luck so I gotta ask mate... I need one asap but the US Postal Service has gotten very greedy of late!
me too!..........but a nice quiet one
yeah me too - to suit your pipes; the Phats I have here have the flanges at all funny angles...
I think they can fix that with minor surgery... 😂
reub ·
westi wrote:for anyone that has sent me pm's.i have been on mars,sorry .work is nuts but the light is at the end of the tunnel ,i am shore of it.
if anyone was after some there are a few left,
ringing is best, but i will return pm's.
9773 7244.
Get Beau to ebay them dude... Will give you more $$'s at auction, seriously...
westi ·
i use to sell them on ebay for more ,but i just want rid of them,my engine combo's are always to big for these ,so there is no point hanging on to them.
if you saw my shed and shop,my god mista hart what a mess.
please buy them .help me to see the shop floor again.
i need some were to put my new engine.
westi ·
pm's sent
NuZo ·
did u get my one?
westi ·
must have over looked it, do you want a set, send me details and i will send them out
NuZo ·
lol my pm!
BrisDubba ·
Westi
You have PM regarding headers.
Cheers
Peter
westi ·
you got mail.
westi ·
expect mail.
they left yesturday.
westi ·
pm's sent
nils ·
Got mine, sweet flanges!
westi ·
sweet as bro.
westi ·
every one else got there's.
aintgotitmusthaveit ·
Hi West got mine back when. Beautiful!
I cant even buy straight pipe for the price you sell these!
Let me know if you still got one and Ill let my mate know. I think he is still interested. Was on this forum but a bit dormant
westi ·
yeh can do.
pm me some details and i will send.
hellbugged ·
WESTI WESTI WESTI HELP ME!!!!........
i need a muffler ASAP, the missus answered a knock on the door and guess who..........the FUZZ 🙅.........
noise complaints about the green beetle, lucky i work 15 hour days cause they've been looking for me for a while🥲.......and yet again, at work i was😂
what muffler will need to be quiet BUT still have performance to a degree??.......i'd like to hang it where a traditional phat boy runs if you know of something similarily sized that will work??? brand?, have you got one, can you send me one? S.O.S
GRrrrRRR, hassle free fairytail is over for me now😠
Damien
matberry ·
Daimo, told you it was LOUD.....my engine made .8 hp improvement with the muff removed and stinger added. 2332 with FK87 and it's quieter than your 1776😂😂😂. Surely there will be something out there.
hellbugged ·
😂.........yeah Matty B over the bloody chinese rubbish........
hellbugged ·
hmm, just had another thought..........how about making more horsepower and swapping the exhaust note for a few PSI of whisstling noise😏
matberry ·
No need for a new muff then, let the whistler machine keep the fuzz away😂
vwsteve ·
is there any more of these left westi?
hellbugged ·
hellbugged wrote:WESTI WESTI WESTI HELP ME!!!!........
i need a muffler ASAP, the missus answered a knock on the door and guess who..........the FUZZ 🙅.........
noise complaints about the green beetle, lucky i work 15 hour days cause they've been looking for me for a while🥲.......and yet again, at work i was😂
what muffler will need to be quiet BUT still have performance to a degree??.......i'd like to hang it where a traditional phat boy runs if you know of something similarily sized that will work??? brand?, have you got one, can you send me one? S.O.S
GRrrrRRR, hassle free fairytail is over for me now😠
Damien
all good.............found a magnaflow in the cupboard (albeit a friends cupboard🤘)..........it's on and noise is better, aaaaaand better HP 😂........fingers crossed still on the fuzz bit, wish me luck!
ohhh, and westi, headers arrived safe and sound all paid for and at home, thanx! (been bit busy to unpack em yet but🙅)
westi ·
sorry dude i haven't been checking my pm's or loggin on .
i wouldn't have been able to help anyway as i have been silly busy.
good to see i9t all panned out on the end.
i am tring to put some stuff together for a fatboy and a superquite twin pass. twin loop.but alass i never have the time.
hellbugged ·
westi wrote:i am tring to put some stuff together for a fatboy and a superquite twin pass. twin loop.but alass i never have the time.
yeah, that would be great!..........it still aint real quiet, but goes well tho, i like that bit 🥷
Sides ·
I'd be interested in whatever you come up with too Westi... especially considering how @#$%ing nice the headers are.
I need a muffler that's consistently under 92db, but like Daimo still want it as free breathing as possible.
Damn noise regs... 🤘
westi ·
yeh can do .who has a car locally with the extractors fitted.i will make one, take it of jig it up and then make some.
i will tr to work out a price of what they will be worth to see if it's worth while and keep you posted.
BrisDubba ·
Put me down for one, when you do.
Headers are great...
Cheers
Peter
LUFTMEISTER ·
Hi westi sent p.m regarding these. let me know when you are able. cheers
vassy66T1 ·
Put me on the list also Westi. One shipment of mufflers to Brisbane please 😂
westi ·
more still to sell.i am in need of some junka funding.
unless some one wants to sponsor me.selling these is easier.
BrisDubba ·
Westi,
Any progress on the muffler front, people are lined up for those -
headers are great - if anyone is thinking of getting them..