Volksaddict ·
..Chasing a set of Factory mags and a Tacho dash for my 90 Transporter..appreciate any leads
Aussieveedubbers · Buying, Selling & Swapping Parts
WTB T3 MAGS & DASH
https://forums.aussieveedubbers.com/threads/71542/wtb-t3-mags-dash
Special Air Service ·
Ray,
There is a set of factory alloys on ebay at the moment.
http://cgi.ebay.com.au/VW-T3-FACTORY-ALLOY-MAGS_W0QQitemZ120299913889QQihZ002QQcategoryZ43953QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Not mine.
Cheers
Brendan
There is a set of factory alloys on ebay at the moment.
http://cgi.ebay.com.au/VW-T3-FACTORY-ALLOY-MAGS_W0QQitemZ120299913889QQihZ002QQcategoryZ43953QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Not mine.
Cheers
Brendan
Menangler ·
Ray, it is best to get a Tach from the states, not many in Australia, check out TheSamba, or Ebay USA.
Dave
Dave
Iwish4aSynchro ·
I got some 15" Merc rims + spacers + extension studs + 4 205/60 maybe 4-700K old and all nuts if keen.
But if it be original u after good luck
But if it be original u after good luck
Volksaddict ·
...after reading up on aftermarket wheels ..its aminefield!!...thinking ill stick to standard VW wheels..thanks anywayIwish4aSynchro wrote:I got some 15" Merc rims + spacers + extension studs + 4 205/60 maybe 4-700K old and all nuts if keen.
But if it be original u after good luck
Iwish4aSynchro ·
Yeh nil stress.
Not such much a minefield as a battleground.
Too much information is sometimes just that "too much".
As every T3 owner knows trying to find a decent looking set of rims in correct offset / stud pattern and size/width is dam near impossible. Also living in Australia makes it harder, too much red tape and approvals needed.
Good luck
Not such much a minefield as a battleground.
Too much information is sometimes just that "too much".
As every T3 owner knows trying to find a decent looking set of rims in correct offset / stud pattern and size/width is dam near impossible. Also living in Australia makes it harder, too much red tape and approvals needed.
Good luck