wanted > weber idf 40 28mm venturi's

a long shot i know....
but i am looking for a set[x4] 28mm venturi chokes for my weber idf 40's......
any leads gratefully recieved....ta...👍

First - can i ask why??
Even a 1600 wants 32's
Not just my opinion. Jon Conolly at AC.net does this upgrade when selling the 1600S option on 40 Webers

1600S Option
We will configure your dual 40 or 44 IDFs for optimum use.
We change the venturis to 32mm, and rejet the idle, main, and air jets for this price.

http://www.aircooled.net/new-bin/viewproductdetail.php?keyword2=FSK0020&cartid=

Whatever- You can try
Carburettor Service Company
240 Parramatta Road
BURWOOD NSW

9747 4066

or Richard Holzl at V Force

or
http://www.aircooled.net/new-bin/viewproductdetail.php?keyword2=FSK0008&cartid=

Barry

Because he probabley wants some low down grunt that 32's won't give you with the wrong cam

thank's for the info,
yeah just experimenting with a little more low down torque & response...🙂

I have a used set of 4 you could have for $30 plus whatever postage is from Brisbane.

with twin 40IDFs and stock valves unless u got a pretty wild cam 28s would be good choice for street use

pm sent pudgy...👍

ok ,just thought i would add...the motor is now back together & everything balanced...thank's for the bits mr p....👍
the 1641 works a real treat with 28's fitted..a different car,no spitting or bogging....loads of response...tip top....my bigger vents are now shelved for the forcoming bigger motor...
right, off for a cruise....happy new year......👍😂