vwsteve ·
ive seen fan shrouds before with welsh plugs nicely blocking off the holes for the air vent to exhaust, anyone know what size welsh plug to use from memory?
Aussieveedubbers · Tech Talk
fan shroud duct hole size?
https://forums.aussieveedubbers.com/threads/74218/fan-shroud-duct-hole-size
Mick058 ·
ummm...36, umm...i got some not long ago, perfect size - had to knock them in, but they went in snug - put hose clamps on too just in case.
Someone probably knows, if no one posts ill check and post on the weekend.
Someone probably knows, if no one posts ill check and post on the weekend.
Mick058 ·
36 sounds wrong, just came to my head - may be imperial measurement they worked in.
Joel ·
1 7/8" 👍
so snug they dont even need fixing in
but good luck finding them
u will probably need someone to order them in cos its not a real common size
so snug they dont even need fixing in
but good luck finding them
u will probably need someone to order them in cos its not a real common size
VWCOOL ·
oil top-ups must suck on that one!
matberry ·
52mm if MY memory serves me correctly
Joel ·
nah i gotta super high tec cut in half 600mm coke bottle which makes easy work of it 😂VWCOOL wrote:oil top-ups must suck on that one!
its actually the same one i use on all bug motors
DirkHedde ·
you can get these from most vw part shops. i got some years ago cheap and they were right
vwsteve ·
ok thanks everyone🙂
Mick058 ·
i know its late, but yeh, Joel spot on 1 7/8