vwsteve ·
1st dibs on carbys and centreline wheels and gearbox h/d side cover please, email sent, steve 0409475131
Aussieveedubbers · Buying, Selling & Swapping Parts
FOR SALE T4, T1 and T3 PARTS
https://forums.aussieveedubbers.com/threads/74959/for-sale-t4-t1-and-t3-parts
waltermitty ·
43.Used Italian Weber 44 IDFs with Manifolds sell as pair only. Need reconditioning. Sell as a pair $ 80 PM sent Im keen on these can pick up tonight !. m
Craig Torrens ·
Hi, I have sent email re purchasing parts
I will take items 26,33,43,45,47,51,55.
I'm located in Hornsby so can pick up tonight.
Regards
Craig
I will take items 26,33,43,45,47,51,55.
I'm located in Hornsby so can pick up tonight.
Regards
Craig
vassy66T1 ·
Hi
I would like to take the following
27.New T1/T3 Mahle ‘’B” pistons and barrels, complete with rings g/pins for stroker up 82mm $ 320
34.NOS T1 striker plate suit early beetle oval models door $ 40
24.New T1 Competition Eliminator heads (bare) with manifolds, 94 mm bore $ 800 pair
25.New T1 crank case, magnesium, dual relief $ 390
2. New T4/Bus Piston & Barrells Bus 2000cc 1973-1979 $ 320 set
I will need to organise freight to QLD so I will liase with you on this. ( I have someone who will do local pick up if need be .. ta)
PM and e-mail sent
I would like to take the following
27.New T1/T3 Mahle ‘’B” pistons and barrels, complete with rings g/pins for stroker up 82mm $ 320
34.NOS T1 striker plate suit early beetle oval models door $ 40
24.New T1 Competition Eliminator heads (bare) with manifolds, 94 mm bore $ 800 pair
25.New T1 crank case, magnesium, dual relief $ 390
2. New T4/Bus Piston & Barrells Bus 2000cc 1973-1979 $ 320 set
I will need to organise freight to QLD so I will liase with you on this. ( I have someone who will do local pick up if need be .. ta)
PM and e-mail sent
Gibbo ·
35.NOS VW German T3 door beading, suit early Type 3s $ 8 - Pls!
Happy to pay postage, lemmie know the cost to 4006.
Cheers
Happy to pay postage, lemmie know the cost to 4006.
Cheers
volumex ·
34.NOS T1 striker plate suit early beetle oval models door $ 40
Which striker plate? Ovals had 3 different types. If it's the 52-55 year model one, then I'll take it.
Which striker plate? Ovals had 3 different types. If it's the 52-55 year model one, then I'll take it.
66deluxe ·
i will take item 1 please the two new AMC type 4 heads.
Damo.
Damo.
Avignon ·
Guys, thankyou for your response and enquiries. I'll come back to each of you tonight when i'm home as some of you require delivery arrangements, photos etc.
Brief'ly :
1. Rexy : you have the 1st priority on the IDF Webers, Centerline wheels and heavy duty steel side cover for T1 gear box.
2. Watermity : you are next on line for the IDF Webers if Rexy drops out. Sorry, his e-mail went in first.
3.C. Torrens : Items 26(1600cc P/B), 33(1 3/8'' exh), 45(T1 used muffler), 47(F/Inj Case), 51(early model fuel tank) are yours. Item 55 (1800 F/Wheel) i need to confirm and item 43 (IDF Webers) has been taken.
These items can be picked up next Sunday 1st Mar as i am fully booked out for the rest of the week.
4. vassy66T1: New Mahle B 94mm P/B, NOS s/plate for oval, New Comp Elim Heads, New T1 case, New Bus P/B are yours. I'll e-mail you with the freight/pick up arrangement tonight.
5. Gibbo : NOS T3 beading is yours. Pls e-mail me so i can advice on the postage.
6. volumex : i am almost certain the striker plate is for 56 oval window beetle. i.e not for 52-55.
Cheers,
Justin
Brief'ly :
1. Rexy : you have the 1st priority on the IDF Webers, Centerline wheels and heavy duty steel side cover for T1 gear box.
2. Watermity : you are next on line for the IDF Webers if Rexy drops out. Sorry, his e-mail went in first.
3.C. Torrens : Items 26(1600cc P/B), 33(1 3/8'' exh), 45(T1 used muffler), 47(F/Inj Case), 51(early model fuel tank) are yours. Item 55 (1800 F/Wheel) i need to confirm and item 43 (IDF Webers) has been taken.
These items can be picked up next Sunday 1st Mar as i am fully booked out for the rest of the week.
4. vassy66T1: New Mahle B 94mm P/B, NOS s/plate for oval, New Comp Elim Heads, New T1 case, New Bus P/B are yours. I'll e-mail you with the freight/pick up arrangement tonight.
5. Gibbo : NOS T3 beading is yours. Pls e-mail me so i can advice on the postage.
6. volumex : i am almost certain the striker plate is for 56 oval window beetle. i.e not for 52-55.
Cheers,
Justin
Craig Torrens ·
Cheers, Sunday is fine.
vassy66T1 ·
Thanks Justin.
Much appreciated.
Much appreciated.
vwsteve ·
thanks justin, i will call after 7 and make arrangements,steve
RISKYBUG ·
me me
this one please
42.Used Weber progressive carby complete with manifold. Extra jetting included. Working order, works well with up to 1776cc. $ 70
this one please
42.Used Weber progressive carby complete with manifold. Extra jetting included. Working order, works well with up to 1776cc. $ 70
whatnow ·
thanks justin. i'll arrange the pick up tomorrow night.
risky give me a call i might be able to get it up here for you.
risky give me a call i might be able to get it up here for you.
555bug ·
I'll take item 16 i(228mm clutch & pressure plate) f it's still available. PM me your payment details.
Cheers Stephen
Cheers Stephen
fish26 ·
Dude, some of those prices are real cheap, i bet we see some items posted for profit. 😉
philsmanx ·
if risky bug dont take 42 i will cheers, phil
Camo ·
Is Number :
29. New T1 plastic warm air plastic duct each @$0.50
The ones that go between the heater boxes and the car body.
Like these, if so I will take left and right. Thanks, Kevin
29. New T1 plastic warm air plastic duct each @$0.50
The ones that go between the heater boxes and the car body.
Like these, if so I will take left and right. Thanks, Kevin
Avignon ·
Guys, i have updated the parts for list as to which ones that have been SOLD or PENDING.
Best to e-mail me or ring. My apologies if i have not replied to your enquiries/e-mails.
Just clarifying on the delivery and payment of the items for sell:
1. Pick up and cash would be ideal. Pick up and MONEY ORDER is fine. Sorry, no bank transfer.
2. Interstate buyers can arrange their own couriers/freight or i can organise delivery via Australia Post (at your cost) if the items are not too bulky. Note i do NOT charge/profit from this. Payment by MONEY ORDER only please. Sorry, this is for security reasons.
3. If the items are not too large and you are buying several items (total greater than $100), i can deliver them within Sydney metro. However this would not happen until Sunday 15th March.
Camo : sorry i was ambiguous in the description. It is actually the ''plastic duct'' coming off the fan housing (fresh air) to the heater boxes.
Cheers,
Justin
Best to e-mail me or ring. My apologies if i have not replied to your enquiries/e-mails.
Just clarifying on the delivery and payment of the items for sell:
1. Pick up and cash would be ideal. Pick up and MONEY ORDER is fine. Sorry, no bank transfer.
2. Interstate buyers can arrange their own couriers/freight or i can organise delivery via Australia Post (at your cost) if the items are not too bulky. Note i do NOT charge/profit from this. Payment by MONEY ORDER only please. Sorry, this is for security reasons.
3. If the items are not too large and you are buying several items (total greater than $100), i can deliver them within Sydney metro. However this would not happen until Sunday 15th March.
Camo : sorry i was ambiguous in the description. It is actually the ''plastic duct'' coming off the fan housing (fresh air) to the heater boxes.
Cheers,
Justin
vwsteve ·
pm sent
Avignon ·
BUMP
Gibbo : are still interested with the T3 NOS door beading ?
Please send me an e-mail if you do.
Cheers,
Justin
thebekenofcowes@optusnet.com.au
Gibbo : are still interested with the T3 NOS door beading ?
Please send me an e-mail if you do.
Cheers,
Justin
thebekenofcowes@optusnet.com.au
type3lover ·
G'day mate!
I'll take the following and pick up when it suits you...
12 - T4 clutch cable
13 - T4 acc cable
36 - T3 front beam rubbers
54 - T3 heater boxes
60 - kombi bullbar
61 - kombi carbs
That comes to $75 is that right?
I really like the type 4 muffler and LOVE the cannons too!
I'm just on the other side of the gorge which is very handy.
Would you mind PM'ing me your phone number?
Thanks a lot,
Toby 👍
I'll take the following and pick up when it suits you...
12 - T4 clutch cable
13 - T4 acc cable
36 - T3 front beam rubbers
54 - T3 heater boxes
60 - kombi bullbar
61 - kombi carbs
That comes to $75 is that right?
I really like the type 4 muffler and LOVE the cannons too!
I'm just on the other side of the gorge which is very handy.
Would you mind PM'ing me your phone number?
Thanks a lot,
Toby 👍
Avignon ·
Hi type3lover (Toby),
Can you please send me an e-mail on : thebekenofcowes@optusnet.com.au to arrange the pickup time.
Cheers,
Justin
Can you please send me an e-mail on : thebekenofcowes@optusnet.com.au to arrange the pickup time.
Cheers,
Justin
Craig Torrens ·
good to meet you today Justin..........thankyou for the goodies !
Avignon ·
BUMP.
List Updated.
Cheers,
Justin
List Updated.
Cheers,
Justin
Avignon ·
BUMP
Avignon ·
Hi all,
The list has been updated. Some new items added.
Cheers,
Justin
The list has been updated. Some new items added.
Cheers,
Justin
RISKYBUG ·
hi mate just got the stuff thanks heaps!!
RISKYBUG ·
quote]Originally posted by fish26
Dude, some of those prices are real cheap, i bet we see some items posted for profit. 😉 [/quote]
wrong justin lost money on my post and didn't ask for anymore
but i will be sending some $$$ anyways
Dude, some of those prices are real cheap, i bet we see some items posted for profit. 😉 [/quote]
wrong justin lost money on my post and didn't ask for anymore
but i will be sending some $$$ anyways
DDWR450F ·
Justin
9.New T4/Bus header and muffler USA made, thick flanges, $ 230 {{is that the pic above?}}
41.Used (for ½ hr only) Stainless Steel (304 grade) buggy/baja/trike cannons. Deep awesome sound.$ 270
Are these any good for Kombi 2lt going into a GS Limo buggy??
9.New T4/Bus header and muffler USA made, thick flanges, $ 230 {{is that the pic above?}}
41.Used (for ½ hr only) Stainless Steel (304 grade) buggy/baja/trike cannons. Deep awesome sound.$ 270
Are these any good for Kombi 2lt going into a GS Limo buggy??
Avignon ·
Hi DDWR450F,
1. The T4 extractor works well with a stock 2 l Kombi motor. If you install it on a GS Limo buggy it will (in my opinion) sits rather low (too close to the ground) AND protrude too far back from the engine block.
i.e i would NOT recommend instlling this type of extractor on your GS Limo buggy without too much mods in addressing the bove issues.
2. The Stainless Steel extractor's pipe bend and flanges are built for Type 1 exhaust outlets, these are different to Type 4 (''Kombi'') motor.
Yes, this extractor can be modified to accomodate the latter's flanges. Again in my opinion this extractor best left for buggies with Type 1 motor.
A custom made extractor for your GS Limo Buggy (with its Type 4 motor) is the better way to do it, doing it this way you can be sure how the muffler(s) sit and clear up the carbs, body etc. I suggest you get in touch with Mike Sharp from Sharpbuilt in QLD, just google the name.
Hope that helps.
Cheers,
Justin
PS : Hi Risky, glad you've received your item.
1. The T4 extractor works well with a stock 2 l Kombi motor. If you install it on a GS Limo buggy it will (in my opinion) sits rather low (too close to the ground) AND protrude too far back from the engine block.
i.e i would NOT recommend instlling this type of extractor on your GS Limo buggy without too much mods in addressing the bove issues.
2. The Stainless Steel extractor's pipe bend and flanges are built for Type 1 exhaust outlets, these are different to Type 4 (''Kombi'') motor.
Yes, this extractor can be modified to accomodate the latter's flanges. Again in my opinion this extractor best left for buggies with Type 1 motor.
A custom made extractor for your GS Limo Buggy (with its Type 4 motor) is the better way to do it, doing it this way you can be sure how the muffler(s) sit and clear up the carbs, body etc. I suggest you get in touch with Mike Sharp from Sharpbuilt in QLD, just google the name.
Hope that helps.
Cheers,
Justin
PS : Hi Risky, glad you've received your item.
DDWR450F ·
Thanks mate, ill be talking to mike today
nils ·
the CV's definatly T4 not T2?
Avignon ·
Hi nils,
I think you are actually CORRECT.
The CV Joints are actually for T2 transmission, i.e Kombi gearboxes mated to Type 4 motors.
Hope that clarifies further.
Cheers,
Justin
I think you are actually CORRECT.
The CV Joints are actually for T2 transmission, i.e Kombi gearboxes mated to Type 4 motors.
Hope that clarifies further.
Cheers,
Justin
SPG guy ·
interested in a set of type 4 carbs and rebuild kits to suit.
do you still have any?
also interested in the t4 extractors, would you be able to get a price for postage to Ballarat Victoria 3354.
let us know how you go
do you still have any?
also interested in the t4 extractors, would you be able to get a price for postage to Ballarat Victoria 3354.
let us know how you go
Avignon ·
Hi SPG guy,
The T4 Carbs (used) are still available, extractors (new) pending, i'll let you know on this one by Tuesday if the other party decide not to proceed.
The carb rebuild kits have been sold.
Please e-mail me on : thebekenofcowes@optusnet.com.au to get the ball rolling.
Cheers,
Justin
The T4 Carbs (used) are still available, extractors (new) pending, i'll let you know on this one by Tuesday if the other party decide not to proceed.
The carb rebuild kits have been sold.
Please e-mail me on : thebekenofcowes@optusnet.com.au to get the ball rolling.
Cheers,
Justin
Avignon ·
BUMP
Updated
Updated
vassy66T1 ·
Thanks Justin.
All my parts arrived during the week. Well packaged and exactly as I expected. I thoroughly recommend him as an honerable seller to anyone looking to get some parts even at long distance.
cheers
Marcus
All my parts arrived during the week. Well packaged and exactly as I expected. I thoroughly recommend him as an honerable seller to anyone looking to get some parts even at long distance.
cheers
Marcus
forry2000 ·
email sent re: item 23
DannyW ·
still have the eliminator heads ?
grogy ·
hi, if u stil have the cvs and boots, im still after some. if u send u acc details, i do the transfer and u can mail em to me. grogy