Donk on ebay... Autocraft · Aussieveedubbers

matberry · 31 Mar 2009, 3:22 pm

Thought someone may be interested in this

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=180340338331&ssPageName=ADME:B:EF:AU:1123

grogy · 31 Mar 2009, 4:06 pm

wonder how many laps at over 8500rpm its done.....................................................................

westi · 31 Mar 2009, 6:59 pm

not many,it has been used as a boat anchor for the last ten years buy the look of it.lol
tell him he's dreamin son.

dangerous · 1 Apr 2009, 6:13 am

For at least the last 15 years the capacity limit has been 166 ci =2719cc.

If someone lives near by, it may be worth checking he head stud spacing to see if it is a 'large bore' spacing.

No pumps in picture but if they are in good shape it may be worth a look.

vw54 · 1 Apr 2009, 3:54 pm

how much 4 the jousting sticks thye may b better value LOL

STOCK · 2 Apr 2009, 11:20 am

come on brad you,ve been looking for something to prop the door open
@ the factory, (about all its good for)

pete wood · 2 Apr 2009, 2:56 pm

I dunno, someone just paid good money for a used pobjoy. I thought it was that sort of figure.... but I know what you mean, it does seem a lot. 🤪

dangerous · 2 Apr 2009, 4:29 pm

That is quite reasonable if it has no windows.
Even when you factor in a new crank and pistons in a rebuild.

You could not build that engine new for 30G.

Boostn · 2 Apr 2009, 4:31 pm

dangerous wrote:That is quite reasonable if it has no windows.
Even when you factor in a new crank and pistons in a rebuild.

You could not build that engine new for 30G.

x2

vw54 · 2 Apr 2009, 4:53 pm

jousting sticks would be good LOL

dangerous · 2 Apr 2009, 5:09 pm

http://www.autocraftengines.com/

http://www.autocraftengines.com/introduction.htm

grogy · 2 Apr 2009, 5:21 pm

no doubt its all good stuff, i used to watch these speed cars and many were doin 9-10k rpm, would be a lot of fatigue on a motor if its workin that hard over time

JVLRacing · 2 Apr 2009, 8:19 pm

dangerous wrote:That is quite reasonable if it has no windows.
Even when you factor in a new crank and pistons in a rebuild.

You could not build that engine new for 30G.

very very true!

fuch · 3 Apr 2009, 7:02 pm

Boostn wrote:
dangerous wrote:That is quite reasonable if it has no windows.
Even when you factor in a new crank and pistons in a rebuild.

You could not build that engine new for 30G.
x2

x3

vassy66T1 · 3 Apr 2009, 10:11 pm

x4 ... wait a minute that is $120k ... no not that mush

though I am sure the usable parts would be worth the $

Boostn · 3 Apr 2009, 11:28 pm

vassy66T1 wrote:x4 ... wait a minute that is $120k ... no not that mush

though I am sure the usable parts would be worth the $

😂