Bought a set of urethane long front beam bushes, and the back came with 2 disposable tubes of goop.
Anyone know what it is?
regards,
Chris.
bajachris88 路
Aussieveedubbers 路 Tech Talk
got 2 small tubes of goop with front beam urethane bushes... is it glue or sealant or sumfiN?
https://forums.aussieveedubbers.com/threads/75811/got-2-small-tubes-of-goop-with-front-beam-urethane-bushes-is-it-glue-or-seala
pod 路
lube most likely馃榿
hellbugged 路
馃檮 is it sticky.........or...........slippery?馃榿
68AutoBug 路
what color is it?
most likely lubricant to help put the bushes in...
and to lubricate them...
although they will be a tight fit...
My thoughts - Lubricant..
LEE
most likely lubricant to help put the bushes in...
and to lubricate them...
although they will be a tight fit...
My thoughts - Lubricant..
LEE
bajachris88 路
its like milky, and gacky/sticky.... not slippery... (suss much lol)
has a texture like silicone sealant, and the goop factor, yet not the smell.
hang on, will check if its cured. That'll solve the mystery...
(comes back)... no its not cured, its been 17 hrs since it was removed from the tube.
I sloshed it all ova the outside of the bushes, the contact surface between the urethane and front beam tubes... It did make em slide in nicely because they did have a firm fit. Maybe thats what it was. i will just slosh a heap of general purpose/cv/lithium grease inside when i shove the arms in.
wadda ya rekon?
has a texture like silicone sealant, and the goop factor, yet not the smell.
hang on, will check if its cured. That'll solve the mystery...
(comes back)... no its not cured, its been 17 hrs since it was removed from the tube.
I sloshed it all ova the outside of the bushes, the contact surface between the urethane and front beam tubes... It did make em slide in nicely because they did have a firm fit. Maybe thats what it was. i will just slosh a heap of general purpose/cv/lithium grease inside when i shove the arms in.
wadda ya rekon?
h 路
throw away your KY and use hubba bubba.. strawberry will stick best..
bajachris88 路
i got some glow in the dark water based stuff laying around somewhere... wadda ya rekon :P 馃槑
Wouldn't taste as good as strawberries though lol
Wouldn't taste as good as strawberries though lol
68AutoBug 路
Throw the General purpose grease away....bajachris88 wrote:its like milky, and gacky/sticky.... not slippery... (suss much lol)
has a texture like silicone sealant, and the goop factor, yet not the smell.
hang on, will check if its cured. That'll solve the mystery...
(comes back)... no its not cured, its been 17 hrs since it was removed from the tube.
I sloshed it all ova the outside of the bushes, the contact surface between the urethane and front beam tubes... It did make em slide in nicely because they did have a firm fit. Maybe thats what it was. i will just slosh a heap of general purpose/cv/lithium grease inside when i shove the arms in.
wadda ya rekon?
only use lithium based Moly grease...
makes things last forever....
[unless You are only 25 years old lol ]
cheers Chris
LEE
pod 路
too much info there Chris馃槀馃槀馃お馃おbajachris88 wrote:its like milky, and gacky/sticky.... not slippery... (suss much lol)
wadda ya rekon?
Stop looking at VW porn馃槉