If you simply gave your dub a rub with soap, took it for a run right through to putting in a new powerplant. Share your effort with an update here of how your lovin your dub.
This is not a tech thread. Go into detail in the tech section. It's an update of how your lovin your dub.
Please post plenty of photos. They tell 1000's of words.
B.
Anthiron 路
today i gutted my baja, and took a wire wheel to the floor, got it 90% finished when i punctured the solid brake line. floor came up good though馃槀
matt 路
had to work, but drove my beetle to and from. does that count?
matt
The_Bronze. 路
Sure does. Thanks for sharing and getting a good start to the thread.
I just bought a 64 and need the motivation.
alien8 路
Me and DaVo installed the glass in my 72 resto project today. Should of taken about two hours but with me and Dave gas bagging, it took most of the day. All went in with little hassle. So happy!
grogy 路
made up some [mounts] cardboard templates to fit the 091 into the bug
Smiley 路
Pulled the clutch servo unit out of my semi-auto and found out that the two spares I have, have also got torn diaphragms! So now I have to order parts from the USA of Americaland. And yesterday I drilled and tapped a temperature sender into the block of my Baja.
LUFTMEISTER 路
Stripped the running gear out of rusty 73 kombi and got the shell taken away ready for the next big thing 馃シ
silver 路
Washed and detailed the GTI and The liberty (its got a boxer engine)
dAVo 路
alien8 wrote:Me and DaVo installed the glass in my 72 resto project today. Should of taken about two hours but with me and Dave gas bagging, it took most of the day. All went in with little hassle. So happy!
What he said 馃檪 Nowhere near as hard as we thought and they fit just perfect. My rubber's are being replaced next weekend 馃槏 along with my chrome bonnet strip and hopefully put on a set of VW mudflaps. Might sort out the electrical monstrocity that's behind my dash tomorrow and just have a general tinker.
Special Air Service 路
The_Bronze. wrote:Please post plenty of photos. They tell 1000's of words.
Here's my 1000.馃槀馃槀
Cheers
Brendan
h 路
went and had a rum and a chat with my beetle in the shed after work today..
h 路
DUBB61 wrote:Stripped the running gear out of rusty 73 kombi and got the shell taken away ready for the next big thing 馃シ
is that the panel?
whatnow 路
after work i put a couple of hours into tiding and reorganising my shed. not glamorous but satisfying (and overdue). them had another go at a stuck bolt that is holding me up.
The_Bronze. 路
Today I played 'researcher' and 'networked' with the local community.
Headed off to Wallsend where I met Andrew and friends, then Berisfield where there was Rolf and about 20odd other dubbers. Then Maitland to meet Rose and Ian with a total of about 40 or 50 dubbers from all over. Port Stephens, Sydney, further west and the local traps.
It was great to meet people, photograph the dubs and chat VW's. Sat and had lunch with CamperPhil and took a few photos.
Gave me some great ideas and made me think long and hard about just what needs to be done and in what order to the 64' I just bought.
B.
Newt 路
Bogged pout floor pans - gotta love em.
The_Bronze. 路
I hope to pick up the 64' this weekend. I also start a new job on Monday so it's all oars out and full steam ahead.
Picks soon.
LUFTMEISTER 路
No.... not the panel H. A swap meet special 馃榿
mickmick 路
Today i learnt how to do the valve clearances for the beetle but then stripped the wheel nut on the Peugeot 307 and had to spend $120 to get someone to take it off 4 hours later 馃槵 Good waste of a afternoon.
NuZo 路
i um.... touched my beetle 馃榾
drove it around today to do some stuff for my parents.
touched it some more....
Went to office works....
touched it some more ....
Drove home... a little more touching 馃榾
kekekeke
i love it, even driving it makes me happy, even with everything stock as a rock, it still puts a smile on my face 馃榾
hellbugged 路
well today i simply gave the 1776cc a hiding.......normal day 馃榾
beetleboyjeff 路
I drove around to several of the jobs today without the trailer on (with about 3/4 of a ton of tools in it) - the 1916 is so much more fun when set free. I should do it more often.
annosL 路
I do at least one thing on the bug everyday, no matter how small or trivial and that leads to more, today just trying to get the motor running better.