*Lowback seats, door cards, seatbelts, all poo brown, a few tears in the seats, door cards are average behind but the outer looks good, seatbelts, one is different, more honey brown, all look ok though
$150 the lot
*2x wide 5 wheels, one with tyre
$30
*Tombstone lights, reflectors, bases, lenses, chrome trim ring
$50 for every set & related parts
*Upright headlights (68> bug)
$100 for 3 complete sets
* Standard guards for a super whole set
3 leftover FL RR RL no FR
*Used drums backing plates & drums, surface rusty, unknown wheel cyl condition, no shoes, drums for 4 & 5 bolt vw, i believe one 5 is a bug the other is kombi?
$20
*single pin calipers from superbeetles, one pair with almost no pad wear, removed from daily driven bug, 2 other pairs split apart for rebuilding
6x discs, all bar one above the wear limit, 2 near new, just surface rusty, shocked when i measured them to be honest
$100 gets you the lot(fits supers & BJ bugs)
* 3 bolt struts, (71-73 bug) worn out inserts, one pair was newish pedders though have been sitting around for awhile
$40 pair
* standard 71 ish steerign wheels, all with various cracks/splits, horn rings are broken/missing
$10 for the box
* some 80s looking buggy wheel
$10
*EJ20 adapter plate & flywheel +bellhousing for kombi box & bonus used clutch disc
$500
*AH code IRS gearboxes, one has dodgy syncro's the other genuinely unknown, never used but id bet its similar to the others
$200 take both
*68-70something guard indicators, average lenses, decent chrome, bulb holders, possibly globes in them too
$20 for the box full
*speedos....
1 fuel gauge/kph sticker 90MPH
1 fuel gauge no sticker, 90MPH
1 KPH, no fuel 140KPH
1 pinstriped vdo australia, no fuel, silver in the center, has sticker in it for MPH & KPH
$100 for the box
*Oil & amps gauges, chrome surrounds, in chrome holder, untested came from the donor shell
$50
*stock superbug torsion bars
$60
*Rust repair sections
RHS A pillar
LH Heater channel
LH rear 1/4 floorpan
$100 the lot
*10x stock beetle wheels 9 with decent rubber, one worn to TWI's in the center
$10 the lot
Pick up this weekend in ipswich...
PM for number
condo008 ·
PM sent about seats and seat belts.
colonel mustard ·
in regards to to gaurds, you talking non L bug.... like S or 1500? love some for the rear....
STIDUB ·
.....
STIDUB ·
....
STIDUB ·
still more to go, havent been home for a few days...
STIDUB ·
..
STIDUB ·
last few for now, more stuff & pics over weekend HOPEFULLY
76stocka ·
I am also keen on the front seats if have a price please let me know
Burgo ·
How much for both your rear tail light lenses??
colonel mustard ·
Hey mate - got some tail lights. Let me know about the rear gaurds. Mine aren't to good for ya. And won't be coming off too soon. Send me a pm about how much you want, tight budget currently.
oldskl60 ·
you have PM re extractors.
colonel mustard ·
hey mate. I'd love to see them both, but probably the steel ones. Really only need the rears as Im looking for 1500 fronts.... Let me know. I'll come have a look sometime if it suits you. Maybe I have some stuff you need... maybe. 🙂 let me know.
kb_ara ·
do you have pictures of the widened gaurds im not fussy if theyre glass or steel but i would like a look... where are you located?
reargards
Kevin
STIDUB ·
more stuff
STIDUB ·
zorst
wiseoldub ·
hey mate, i am interested in a price on the exhaust and the 2 vent engine lid. and delivery to byron? cheers josh
wiseoldub ·
i'll grab the exhaust and the engine lid if that is ok, i am in byron, is there a chance you might pass by and need beer on your way south?
cheers josh
wiseoldub ·
might be interested in that interior too. depending on whether i get the car i want for my wife!
wil let you know, cheers
STIDUB ·
exhaust & middle jack sold to oldskl60 - pleasure doing business
wiseoldub ·
hey mate, hold off on that interior for the moment as we are checking out whether the car will take it. what yr is it off?
cheers, josh
how much for the belts only?
wiseoldub ·
aahhh yes , i'll borrow that time machine when you build it!! i think i may grab that interior, but i will wait untill you get back and come and visit! cheers for yr help!
wiseoldub ·
i'll grab that 2 vent engine lid off you. i will arrange to come up or have someone drop in and grab it. i have a mate (bushed) coming through from gympie on tuesday i think if that is any good to you.
cheers josh
btw , got any chrome mirrors for a 68 bug?
colonel mustard ·
- Guards and rear drums (4 stud) let me know.
Rural Baja ·
Wiseolddub end up grabbing the decklid?
STIDUB ·
edited, in the words of homer, can i have money now? 😁
71dub ·
will the heater channel fit 1971 super bug .am after r/h side only .how much ?
STIDUB ·
eraser, thats what its sitting in/on currently so yes, not sure on price alone, would have to dig out the reciept. will try to tonight while im in the garage 🙂
bumping, ill be at warwick but not bringing things unless people are interested..
71dub ·
thanks for that have sent pm not sure if it worked .i am local at acacia ridge so pick up not a problem .cant make it to warwick this year .
STIDUB ·
ersser, no PM on my end...
BUMPING, warwick was FUUUUNNNN
71dub ·
have tried pm again not sure what happened .warwick looked good from photos posted.any news on cost of heater channel still intrested in r/h side .
BiX ·
Do you have any of the guards left (front and rear for super)? or any of the struts left?
any 4 grill deck lids?
cheers
Drew
STIDUB ·
Hey Drew, yeah have 2 sets, one nice one average/crap (repaired lower section on back right from memory), mustard has interest in the better set, no 4 grill lids, hunting one of them & a smooth one for myself actually
colonel mustard ·
mine!! - soon mate. soon.
i think hellbugged has engine lids for sale??
STIDUB ·
oh yeah, 3 pairs of stock struts, 2 assembled 1 pair in bits, considering dropping the spring cups a few inches on the pair of legs i have at work for the hell of it
BiX ·
Ok, well let me know if mustard changes his mind.
I might give you a call if the other three gaurds (i am really after LH side ones) are in good nick, It might be a goer. Are they with teh triangle or slot bumper mounts on the front (s or L bug?)
Just after the lower strut bodies.
Cheers
Drew
71dub ·
still intrested in heater channel .pm me regards barry
STIDUB ·
Bix, the lower bodies are at work currently, partially wire wheeled, havent lowered the cups yet, will add you on msn & discuss
Ersser, can get into where all my reciepts are now, will Pm you what it cost when i find the right one & we can go from there
STIDUB ·
OH & for anyone else, Buy my leftovers! sick of having my floor & bench covered in parts....
71dub ·
thanks stidub herer from you later
regards barrie
STIDUB ·
ersser iv'e pm'd you
For everyone though... have a NEW sachs clutch disc, sprung center & NEW pressure plate to add to the collection, i seem to be missin reciepts for this gear though but im open to offers currently....
Also a 1600TP in bits, have the P&B's heads, flywheel, block with crank cam & rods in it, been sitting in the corner of the garage for awhile... been cleaning up sarvo & found it again.. well most of it
71dub ·
pm sent call you tomorrow
STIDUB ·
RH side heater channel sold to Ersser. Pleasure doing business with you 🙂
71dub ·
thanks dave just what i needed .question where did you buy your urethane bushes that where on the front end in the bug body in drive way?
STIDUB ·
micks have them, V-force in sydney too, or topline in the USA, micks if they have stock currently would be easiest since you just want stock standard versions 🙂
71dub ·
thanks for that
STIDUB ·
oh customveedub/customoffroad whatever u want to call them MAY have some topline gear if you decide to run it lower than standard 🙂
id highly suggest looking into Superbeetlesonly & germanlook for some info on to make them handle if topline isnt enough for you...
STIDUB ·
found the perfect engine for my toy, buy stuff people! (prefferably the bigger $$$ items) 🙂
STIDUB ·
bumping for the weekend of work ahead 🙂
STIDUB ·
really gotta get rid of the stuff i dont need, should be able to pick up anything anytime 21-24th november, possibly deliver around SEQ for fuel $$
ANYTHING superbug you need let me know, i may have it!
i need to clear out my back shed.... the wheels/tyres are all in there, good rubber, wheels average, would rather they go as sets not as the odd wheel though....
crzbug67 ·
hi do you still have the adapter plate and if so can you send a pic thanks.
cam070 ·
You mentioned you might have a steering wheel hub lying about. I am in need on one that will fit a 76 beetle with 70mm PCD to suit a Momo wheel. Let me know if you have nything to suit.
STIDUB ·
will have a look on the weekend if i have the time 🙂
oh, yes still have the adapter plate & flywheel, pics on photobucket
hmm, sorry thought i had better pics on there, will try to get more of the plate & fly on the w/e too
STIDUB ·
pics of adapter plate & flywheel - beetle clutch disc in it
need anything specific just ask, sorry didnt get any of the steering wheel boss, i know where it is just couldnt get to it in a hurry
OH&S people would have a field day with my garage currently, gotta get rid of this stuff....
cam070 ·
need anything specific just ask, sorry didnt get any of the steering wheel boss, i know where it is just couldnt get to it in a hurry
OH&S people would have a field day with my garage currently, gotta get rid of this stuff....
no worries keep me posted on the boss kit. Will be keen if you have something.
STIDUB ·
will find the boss this week, i have a few days off to play with my toys 😀
for everything else, make me offers, biggest stuff has to go
cam070 ·
Any news on the steering wheel hub?
rastas4 ·
Do you still have the motor at all? What kind of $$ are you after for it, and are you near the Gold Coast?
Cheers
Peter
STIDUB ·
boss kit shoved on a shelf in the corner behind a bodyshell, an engine, set of commo mags, exhaust bits, & boxes of loom & other assorted junk, apologies for the delay was hoping to get rid of some gear by now, thought it was fair since it was based on waay less than ebay bids at the time
cam070 ·
STIDUB wrote:boss kit shoved on a shelf in the corner behind a bodyshell, an engine, set of commo mags, exhaust bits, & boxes of loom & other assorted junk, apologies for the delay was hoping to get rid of some gear by now, thought it was fair since it was based on waay less than ebay bids at the time
OK let me know when you have managed to dig it out
t_tuffnut ·
Can you give us an idea of what is left?
Update the first post or something?
I'm interested in the 140 KPH speedo if it is still there.
Thanks
STIDUB ·
all things in 1st post are still there, unless it said sold to XXXXXXXX or something along those lines
Euro_67 ·
Are the lowback seats still available ?
STIDUB ·
yep, sitting in a corner covered in dust like the other 2 pairs of fronts
if i havent mentioned it before, i have some telsta seats with "adaptor rails" if anyone wants em, stops you sliding off the seat mid corner, i didnt make them though so i cant vouch for strenght/legality but they were used in mine for awhile
71-BEETLE-SEDAN ·
Hav you got pics of these rails?
psimitar ·
are any of the steel rims 4.5,5 or 5.5J x 15? Looking for some wider ones than 4J.
Cheers,
Mike
STIDUB ·
stock standards to the best of my knowledge, never bothered to measure but ill guess they are all 4's
rails are buried in the pile of seats/door cards etc, they are just 25x25rhs with nuts welded in the insides & a slot in the others to slide down the rails(bending the stoppers up to slide on, then bending back to lock them in
psimitar ·
If any of the rims were larger than 4J then I'd be interested 🙂
Cheers,
Mike
STIDUB ·
speedo pic as requested via pm
cam070 ·
any news on the boss kit?
STIDUB ·
certainly, swapped the daily's wheels over & did some freaky gymnyst moves & pulled the box out the other day, just about to put the pics up & seen your post, here ya go!
psimitar ·
if you can check if those wide 5 steels are 5 or 5.5J I'll take 2 off your hands no worries. or If you've got some 5.5J 4 studs 😉
STIDUB ·
all stock wheels, both wide 5 & 4 stud, pretty sure thats 4.5" for all of em, pizza cutters all the way
cam070 ·
Ok now we are talking. I just need to confirm if it will fit a. my car and b. the steering wheel I have. The holes should be 70mm PCD right? How much did you want for it and I will need it to be sent down to Sydney.
STIDUB ·
ill be in sydney in 2 weekends, ill check pcd on saturday hopefully, it fits a 71 column with momo or saas wheel...
cam070 ·
I just checked with a VW supplier, apparently I need a 51L not a 48L, so I don't thnk it will fit my car. BUGGER!!!!!!
jacky_moo ·
would you seperate any of the 1600tp bits 😀
colonel mustard ·
free bump for you sir.
would that KPH speedo fit a 1970 1500 beetle?
STIDUB ·
jackymoo what gear where you after from the engine?
mustard, thanks yes the speedo's fit anything with steel dash, as far as im aware the hole size & mounts are the same for all flat dashes 👍
STIDUB ·
bump for nats, probably driving down so should be able to deliver along the way for a lil fuel $$ 🙂
colonel mustard ·
interesting..
DylanTheDubber ·
Will the adaptor plate work with an ej 22 in a 1302 s bug? P.M Me
From Dylan
STIDUB ·
dont see why not, fits bug/1600/1800 bellhousings by eyeballing it sitting on them & EJ's are all the same bolt spacing other than later ones having more studs... not a huge issue either way 👍
dangerous ·
Can I buy that engine dave?
Does it have the upper cylinder covers?
Let me know how much.
tayloredvw ·
hey mate im interested in a front left super bug door, a l-bug front left guard and curved bug windscreen. got any of these? what are the cheese cutter tyres like? roadworthy stuff?
STIDUB ·
DB - shed clean out with mustard means ive found all the engine gear for you, still no idea of its value though...
tayloredvw - cheese cutters are fine bar one, its under twi's in the center from over inflation, doors i can do, guards yes, windscreen no, available mornings to come have a look during this week, weekend not sure, depends on work, if your keen to have a look for yourself?
ANYTHING ive listed here, ask me about!
i wanna relocate my cave soon, and buy this awesome roller cab for my tools that i found yesterday, would rather have empty space than unnecessary parts 🙂
oh and ive had a look at the loom, it has a few magic boxes on it but nothing that said fuel controller & nothing on it looks anything like the one i have for the sti engine...
STIDUB ·
final bump, dont get shitty when you need something next week, its what usually happens 😵💫
colonel mustard ·
Oh yeah, I'll take the gearboxes, EJ20tt, and the adaptor plate please.... and i'll swap you... um.... hmm....
bugzla ·
always find something always at the wrong time man i need that adaptor ........................... o well till next time i dont have a 6 week old😁
hellbugged ·
rust repair sections stll there?
STIDUB ·
hmmm..... some of them are, from memory 71 dub took the RH sill, i know the A pillar is there, almost tripped on it yesterday, what else do you need? cutting a body up soon... wanna do a chop top??? 👍
colonel mustard ·
So, (nearly) everything has been moved to the new place, And i hear that there is a dump trip in order.
Contact Dave if there is anything you're interested in. 🙂
bajachris88 ·
U still got that 1835 in bits laying around :P????
colonel mustard ·
Tis gone Chris.
STIDUB ·
going twice, dont cry when you want something after its gone 😵💫
dangerous ·
dont you throw out my heads!
vassy66T1 ·
Do you happen to have an oil bath air cleaner for a beetle? (71 super)
STIDUB ·
Heads are safe- should really bring those down to you!
air cleaner, not sure, will check later tonight :-)
71dub ·
dave do you have a right hand headlight reflector ,and a good steering wheel for a super bug.
regards barrie
Pumba ·
Is the A pillar repair section new or cut from a car???
STIDUB ·
negative on the aircleaner
headlights, yep got a box of them
A pillar is a section from micks 🙂
STIDUB ·
mick motors that is 🙂
Pumba ·
PM sent.
STIDUB ·
been at the mothers today, turns out there is an air cleaner...
other than that going once going twice, bulk of it is in the bin.
Pumba ·
I was keen on the A pillar rust repair panel but you never got back to me.
STIDUB ·
sorry. finally had a camera in the shed 🙂
dangerous ·
STIDUB wrote:been at the mothers today, turns out there is an air cleaner...
other than that going once going twice, bulk of it is in the bin.
except my heads...still waiting.😂
Pumba ·
PM sent.
HARDWORK ·
hi
do you happen to have the indicator signal assembly still for the 71 super.
Mine doesnt stay on right turn signal anymore.
If you do, PM and let me know how much including postage to Wollongong, nsw 2530
STIDUB ·
hardwork, i think 71dub requested that at our last club meeting, will suss it out, i think i have more than one anyway but so far only one located, my original did the same thing as yours by the sounds of it 🙂