I'm urgently after some parts for my buggy..... it runs a VW beetle front end, torsion bar setup, and Kombi drivetrain (hooked onto a 2.6L sigma)....
It's a 20ish year old frame buggy, and I took it for its first drive since I bought it to rebuild, and now urgently need some parts to rebuild (now that I know what needs to be done馃檨 ). Basically, after some beetle front end parts, to rebuild.. Ideally an entire front suspension/brake setup (inc torsion bars etc), and Kombi gearbox/diff/axles etc....
will pay cash 馃檪
The gearbox is the most important thing I need ASAP.
Please PM me if you have anything, even if you think it is only good for scrap 馃檪
Cheers
chris1 路
bump 馃檪
still after parts... need them ASAP.. please let me know if you have anything 馃檪
vwperformance 路
PM sent
grumble 路
ball joint or link pin front end?
lohoon 路
Early or late kombi gearbox? Reduction hub gearbox perhaps?
square73 路
I have a 63 splitty box with reduction boxes in the shed here in Adelaide
Kimbo 路
PM sent - I'm in Belair (forgot to add that to the message)
Kimbo
chris1 路
grumble, it is currently set up with link pin, cheers
lohoon, not really sure what the difference is between early/late boxes. Sorry, I'm new to VW...only bought it recently, stell trying to work out what is what.....
I've been told I probably need a 1800 or 2L box though....Also, what is reduction hub box? :P
thanks
chris1 路
square...any idea whetehr that is 1600, 1800, or 2L?
Kimbo, will get back to you as soon as I have 5 posts (apparently you cant PM until then! :P
thanks
Kimbo 路
No probs - all it said was I've got a 1600 kombi box with a 2ltr bell housing sitting in the shed. I've not used it myself as it came as a spare with my race buggy, and I've already got another race spare - so it's just collecting dust at present - if you're interested I'm open to offers.