early beetle parts - updated

hey, my name is adam, im in campbelltown NSW 2560 and i need clear some room in the workshop so here are a few items needing to go.....as for things not listed, i have plenty of parts sitting and doing nothing so let me know what u need and ill see if i have it.... cheers adam ph 0401 55 4049

1. 1967 1300 swing axle gear box, very good nick, only took out to swap to a stronger box for drag racing, no axles or tubes, gearbox and all internals are there and untouched. $100

2. 3 pairs of front drums for king and link front with shoes, wheel cylinders, bearings and backing plates - $20 a pair

3. king and link front beam with adjusters (installed by vintage veedub) straight and ready to go with arms and springs, only taken out to fit narrowed beam. - $130 - (SOLD PENDING PAYMENT)

4. 1600 twin port heads with heavy duty springs, retainers and collets (bought brand new and only put 1000 miles on them) taken off as i upgraded to cb oval ports, to suit 90.5 pistons (1776) and machined 40thou to increase comp to 9.6:1 - like brand new condition - $350 for pair

5. vw ratio rockers and solid rocker shafts 1.25:1, purchased brand new and only did 1000 miles, removed due to upgrading to pauter rockers.... like brand new - $ 120 for the pair

6. early beetle fuel tank with fuel cap, 1967 -excellent condition, no rust, ready to bolt in - $70

7. 1-5/8inch side-winder extractors with sidewinder muffler, stainless steel and polished, been on the car for 1300 miles and in perfect condition exept for small scratch on underside of muffler.... - $480 for the lot including muffler

I will take the front beam PM sent cheers shane.

2nd dibs on beam thanks.

more pics of heads and rockers

have a near new gearbox strap for a beetle or early kombi, about 1 month use.... - $40 cheers adam

if the gearbox strap is front and rear i will take it mate, cheers steve

rexy wrote:if the gearbox strap is front and rear i will take it mate, cheers steve

sorry should have been more specific, its for the bellhousing, mounts on the fork bolts and goes around the end of the bellhousing..... if u still want it let me know... also if u did want a front brace aswell i can get one for you, brand new, just let me know and ill get the price for you... cheers adam

i will pass on it adam, thanks anyway