I have to channge the timing belt on a 1997 toyota camry, ive posted on camry forums but got poor answers. I was wondering if anyone could give me a hand in what i have to do and the easiest way to do it.
Cheers
Josh
HappyDaze ·
Sorry Josh, can't help with the belt but, ' top marks ' for the post! Very easy to read and understand - keep up the good work.
I'm not having a shot at you, I'm ' fair dinkum'.
Cheers, Greg
HotRodMatt ·
V6 or 4 banger?
I did a V6 not long ago. Shit of a job.
68AutoBug ·
Terrible job doing timing belts...
LEE
bajachris88 ·
Done it 6 times to 3 5sfe's and 1 3sfe, and 1 3sge and my proto-type 5sge. all use the same S-block in the 4 banger series. Just different head/top end configurations.
What questions you got :P??
71-BEETLE-SEDAN ·
Its a six cylinder 3 litre.
Well for starters what should i be removing to get at the covers, i can get the top cover off and thats it. I need to get to the bottom one.
Keep checking back because i will have more questions.
ian.mezz ·
Not a good job I hope you have insurance on your work🙅
colonel mustard ·
Listen to Ian, he is a servicing expert. Might be a bit big of a job to tackle, especially if you haven't had much mechanical experience before.
ian.mezz ·
colonel mustard wrote:Listen to Ian, he is a servicing expert. Might be a bit big of a job to tackle, especially if you haven't had much mechanical experience before.
No a expert is a drip under pressure😂
I am just a General service guy
thanks colonel mustard
71-BEETLE-SEDAN ·
OKay, im not doing it on my own, we were just stumped on what to remove to get to it, but thanks for the help.
Ian what book is that from?
ian.mezz ·
That's from our automotive programme that we use for work for all cars, it's called Boyce's
71-BEETLE-SEDAN wrote:OKay, im not doing it on my own, we were just stumped on what to remove to get to it, but thanks for the help.