Hi guys
Anyone have a picture of what tin work goes on the bottom of the barrels.
Thanks Trev
clinker42 ·
Aussieveedubbers · Tech Talk
Lower Cyl Head tin work
https://forums.aussieveedubbers.com/threads/81323/lower-cyl-head-tin-work
Bizarre ·
takis ·
Are you thinking of cool tinware
Is this for type 1?
Is this for type 1?
hellbugged ·
sure that's the one you wanted to link bizarre?
Joel ·
a really common mistake people make thinking theyre improving there cooling is putting type3 cool tins on upright motors which actually hinders cooling
upright motors should have these deflector tins and only these
frequently left off by first timers putting the heads on
upright motors should have these deflector tins and only these
frequently left off by first timers putting the heads on
clinker42 ·
Its a 1650. It has the two deflectors on it but the tins I put on the top of the cylinders have bolts holes which look to me like their should also be tin work on the bottom.
pod ·
the ones on the edge near where the numbers are ,are for the extra wide tinware for buses
hellbugged ·
clinker42 wrote:Its a 1650. It has the two deflectors on it but the tins I put on the top of the cylinders have bolts holes which look to me like their should also be tin work on the bottom.
ahhh okay........
In the centre of this pic there are two big pieces with a large curve then long flat area........ they come around from the rear of 3 and 1 barrels and go below the pushrod tubes. These pieces also bolt to the engines case on the very lower edges of the sump and to the heater boxes (if you still run them)
On either side of the pulley in the picture are two pieces that postion again, below the top cylinder covers against the barrels number 2 and 4
Small pices are easily regonisable from a big dimple in them and they belong here........
The longer ones here........
Bizarre ·
Yep - i am sure that is NOT the one i wanted to link to 🤪hellbugged wrote:sure that's the one you wanted to link bizarre?
😂
clinker42 ·
Hellbugged
Thats fantastic, exactly what I was after. Do have a link that includes the names of the items against their numbers.
Thats fantastic, exactly what I was after. Do have a link that includes the names of the items against their numbers.
hellbugged ·
not sure they have names........just make em up using thingo, matchamecallit and the whatsamaduber
😉
maybe here....
http://www.shoptalkforums.com/viewtopic.php?f=34&t=107350
😉
maybe here....
http://www.shoptalkforums.com/viewtopic.php?f=34&t=107350
clinker42 ·
Hellbugged
In your pic, above your alternator, what is the round piece, looks like it goes on the doghouse shroud behind the alternator. I certainly dont have that part.
In your pic, above your alternator, what is the round piece, looks like it goes on the doghouse shroud behind the alternator. I certainly dont have that part.
matberry ·
It's the fan. Looks funny because its all pretty & black