hey people
have a 68 wagon am separating body from pan and something wont give have done all the bolts around the pan the 4 in the pan head and the 2 at the very front ( the front has dropped away from body) but the rear is holding me up have done the ones across under rear seat , the 2 on the top of the shock towers but still no love!! pan has slightly separated from body? have also undone the 2 holding the outside of the rear subframe part so it has dropped away either side.
not sure what ive missed but the last one i separated there wasnt anymore bolts?
cheers
rhys
Midlife crisis ·
In the fastie I did there were two bolts one each side in the rear boot which goes to the rear torsion tube , try theses.
Marc
Volksaddict ·
dont you hate that!!
vw54 ·
center one on rear sub frame
Smiley ·
Make sure that the seat belts are undone from the car too. I left them in one day and we couldn't work out why the body wouldn't lift off. The belts were bolted to the pillar and pan and stopped us going too far.
Smiley
kombi_kid ·
sorted it out didnt realise the bolts went through the body onto pan above the rear saddle ones so all sorted old pan to the tip IRS pan ready to go!(well just about)