kadron question

does anyone here run an svda dizzy with their kadrons?
im trying to find info on where to tap the carbs for a vacuum line.
im also looking for new kadron bases as my bushes are pretty worn, and have found some info on new ones being available with a vacuum port already fitted to them.
any info is greatly appreciated

carby/fuel inject specialist should be able to rebush the throttle bodies.had mine done a couple years ago and made a huge difference, cost 50 a side then.
tapping for vacuum appeaqrs to be a bit of a mystery (secret)
phil

AJ sims??? Usually has lots of kaddy stuff.

yea its all a secret alright, shame it wouldn't be worth sending the carbs to aj sims

A few threads from the Samba that might help

http://www.thesamba.com/vw/forum/viewtopic.php?t=88434&highlight=kadron+vacuum+port

http://thesamba.com/vw/forum/viewtopic.php?t=71938&start=40&postdays=0&postorder=asc&highlight=

http://www.thesamba.com/vw/forum/viewtopic.php?t=98381&highlight=kadron+vacuum+port

http://www.volkszone.com/VZi/showthread.php?t=296623&page=2

have a look at this

LowBugget in the US specialises big time with Kadrons, nothing else.

http://www.lowbugget.com/main_page.html

He claims to be cheap too. I got a quote last week to get jets and venturies (yes the venturies are easily changeable) and it was US $82 without postage for 4 jets and 2 venturies.

This post is for a set of AJ Sims modified Kads

http://forums.aussieveedubbers.com/viewtopic.php?tid=81972&page=1#pid762564

Might be able to see there