hey all...
ok... had some time off... looking again. missed 2-3 really good ones that im kicking myself. also noticed a few sold lately🥲
im after an early model Fasty, Z interior etc... (maybe Notch)... preferred regoed. work already done. need for daily driver... But
whats out there? what do you have hiding in your sheds... you know the old project that you know you'll never complete:p
have you thought about selling?
cheers matty
p.s... Plz PM me.
shaven ·
bump... any others😘
debiasi4 ·
my dad wants sell his 65 notch it has- all orig paint although thin on the roof in very pale blue
- never been in a major crash but has small parking dents
- rust in normal spots in mud guards but nothing in main body or floor
- salt and peper trim in preety good nick but no floor mats
- has just been lowerd and converted to 12 volt and had a tune to get running nice
- still has orig single car engine
- good tyres on back fronts are geting down
ph 08 8262 7533 work hours ask for peter or me adam
car is in adelaide he wants $4000
Saggas ·
good luck with the search.
these seem to be the new 'black' everyone wants a type3 atm.
its good 🙂
passatbird ·
Hi...Tony here from Adelaide, I have a sky blue 1965 S model notch available for high $3ks,,,is original german import, and has strong motor with twin carbs...SA car from new...contact is 83586807 or 0431945116.
shaven ·
anyone got something??? can anyone help me😍
Notch:
Fasty:
hellbugged ·
where you at Matty?
empi ·
Mine is still for sale. thought you were going to call
shaven ·
i did didnt i... i left a msg last week. been in nsw @ funeral... call tomorrow mate.
shaven ·
hellbugged wrote:where you at Matty?
in ballarat VIC... what you got😎
Bump😂
ok easy find... well so i thought... :?
WTB early Fasty (or notch), with early dash, wrap around lights, manual, "z" arm rests & ohhh a factory sunroof would be great...
does anyone know who owns this... believe it hides in VIC :roll:
Hutcho ·
Hey mate,
What was wrong with Adams or Tonys? Is it because you're after one with Z interior and a roof? These are both easyish to install if you get one that doesn't have these features...
Good luck,
Steve
PS Thanks for the pics!
shaven ·
Hutcho wrote:Hey mate,
What was wrong with Adams or Tonys? Is it because you're after one with Z interior and a roof? These are both easyish to install if you get one that doesn't have these features...
Good luck,
Steve
PS Thanks for the pics!
hi steve...
adams (debiasi4) is a nice 65 notch. it hasnt got some of the things i really want, wrap around lights, Z interior etc i am surprised it hasnt sold.
as with Tony's (passatbird) i can not remember what it is like?🤪
are you selling yours😘
cheers matty
1500S ·
shaven wrote:
Hutcho wrote:Hey mate,
What was wrong with Adams or Tonys? Is it because you're after one with Z interior and a roof? These are both easyish to install if you get one that doesn't have these features...
Good luck,
Steve
PS Thanks for the pics!
hi steve...
adams (debiasi4) is a nice 65 notch. it hasnt got some of the things i really want, wrap around lights, Z interior etc i am surprised it hasnt sold.
as with Tony's (passatbird) i can not remember what it is like?🤪
are you selling yours😘
cheers matty
You'll have more luck with finding a '66-67 Fasty with that interior. If you are looking for a Notch or Square with it you'll have more luck finding rocking horse dung! If you want that trim in/on a Notch you are limited to a 1964-65 import only from Germany. Rush over and get that one from Tony in Adelaide!!
Only a couple of Notches left in OZ but good luck with your search as there may be still a few hidden somewhere.
DH
shaven ·
ohhhh thats nice... is it for me😘
ok... ill even pay a "Finders Fee" to the person... if i buy the car they lead me to... can not be that hard😘😎🤓
hey vice...
yes paul's is very nice. i have known about it for awhile. there is just one or two things is doesnt have that i do want... im just being fussy🙅
it will turn up soon.
cheers matty
empi ·
Matty what is it that you are after (Not trying to push my car as it now off the market) if there are certaing features of a typ3 that you are after it might be an idea to modify to achieve.
vicelore ·
Also interested.. That one looks the goods.. I would of baught it if i could of got a contact number for him a month ago..
Cheers Vice
Dyno ·
shaven wrote:ohhhh thats nice... is it for me😘
ok... ill even pay a "Finders Fee" to the person... if i buy the car they lead me to... can not be that hard😘😎🤓
Now, whats gonna happen if I find a car in Ballarat... I do visit there as my sister lives there and I DO sniff around when there!
shaven ·
empi wrote:Matty what is it that you are after (Not trying to push my car as it now off the market) if there are certaing features of a typ3 that you are after it might be an idea to modify to achieve.
mate its looking like it... but i have time🥲
ok the dream wish list... does something like this exist🤪 is there a model with all these specs? something like the pics below...
wrap around blinkers
"Z" trim with chrome strips front & rear
window rubbers with chrome insert trim
earlier model slides on dash
cigarette lighter
factory sunroof
rear popout windows
shaven ·
love ... love this😍😘❗
jhp1 ·
So going by your pics you're after a 66 era pigalle with a sunroof.......................................Goodluck.
I know of one, anywhere, and theres no way he'd sell it
And if he did decide to, I'd move heaven and earth to make it mine
So in other words to fulfill your list you have somewhere between buckleys and none
As Adam said you'd be better off modifying something.
shaven ·
Dyno wrote:
shaven wrote:ohhhh thats nice... is it for me😘
ok... ill even pay a "Finders Fee" to the person... if i buy the car they lead me to... can not be that hard😘😎🤓
Now, whats gonna happen if I find a car in Ballarat... I do visit there as my sister lives there and I DO sniff around when there!
i can not believe you havent called me already... i will need somewhere to store it😂
what do you have hidden for me... go & have another look in that big shed😍
Hutcho ·
How much do you have to spend on one? I'm thinking of around 30k + and you should find one for sure!
empi ·
Originally posted by shaven
mate its looking like it... but i have time🥲
ok the dream wish list... does something like this exist🤪 is there a model with all these specs? something like the pics below...
wrap around blinkers - Change the guards , or cut a hole in existing guard
"Z" trim with chrome strips front & rear - door trims clip in.
window rubbers with chrome insert trim - type 3's come standard with this
earlier model slides on dash all type 3s up to mid 68
cigarette lighter - drill hole i have a few spare.
factory sunroof- give up
rear popout windows - easy (square/fasty- not so easy notch)
type3disease ·
i can supply the popouts Adam/Matt...!
empi ·
Thats not the issue , only select notchbacks will have the provision for the pop outs, all notches will have the gap for the pop out hinge but there is a metal tongue that holds the pop out in and quite alot of type 3s dont have this tongue. I too have the pop outs Ben (Thanks for offer)
type3disease ·
no worries
have B pillar sections n tounges too
and a trick to getting around the issue if you have no metal tounge - hence the popouts in my red notch😉
so Matty go get a car and then build it the way you want...!
Scarab ·
any of you blokes bragging that you've got Notch popouts want to sell any????
I am pretty keen on having popouts for my Notch....but not having a lot of luck.....
PM me if you have anything excess to your own requirements and want to sell.....thanks in advance!
Scarab (aka: Paul)
empi ·
find out if u have the tongue in the window pillar first
Scarab ·
I assume I am looking in the 'B' pillar?? from memory, I definitely have the slots for the hinges, and also the provision on the 'C' pillar for the catch.....but not sure about the 'tongue'.....can you give me a bit of an idea of what I am looking for please Empi?
Cheers!
Paul
PS.....sorry for hi-jacking your thread Shaven....at least its keeping it at the top of the list though! 😁
empi ·
There is a rectangular slot in the b pillar some cars came with a metal tongue welded in and other cars didnt (u wont know till u pull side windows out) it is pretty random with Aussie cars some have em some dont, Pop outs were marketed to colder weather climate countries.
Thanks for that Empi...really appreciate your help on the research.
I was surfing the Samba earlier (ssshhhh....I was supposed to be working while at work, but dont tell anyone! 😂), and came across this thread....it shows an indepth way of fitting the popouts using beetle popout hinges, rather than the original tabs. Seems like a pretty good idea to me....the hinges are readily available through Cip1 or the like, and all it needs is a small hinge cover, which is also very available.....sounds like a good idea if the car doesnt have the tongues, and you cant find a donor section from another car to weld in.
Yeah i saw this too, i see no reason why you wouldnt be able to do the beetle style hinge bit of fiddleing but doable, I have no idea why Vw decieded to go this type of hinge and not the beetle way. (I am sure there is some kind of logic behind it) Pulling the type 3 pop outs apart can be a prick especially the little phillips head screws that always thread😬 Have a look and see if you have the tongues first it may save you alot of time etc.
Scarab ·
just checked my Notch and also a donor Notch that I have....neither have the tongues 🙁
looks like I'll be going down the track of the Beetle hinges......at least there is a solution out there for me! 😁
Hope you find an early Notch or Fasty Shaven.....at least you know what to look for if you want to fit popouts 😉
Thanks guys!
Scarab (aka: Paul)
shaven ·
Scarab wrote:S.....sorry for hi-jacking your thread Shaven....at least its keeping it at the top of the list though! 😁
hey paul... mate it doesnt worry me... OHHH but it does worry others... as you say. it adds info + keeps the thread alive.
cheers matty
p.s... fasty will turn up soon😊
Scarab ·
dont know if you are still looking mate....but this is on Ebay....
that one looks to fit the bill pretty damn well - nice looking car....
😎
chris7 ·
i love um! how can you not!
shaven ·
type3disease wrote:gotta be close Shaven
that one looks to fit the bill pretty damn well - nice looking car....
😎
shattered...
someone beat me by 30 secs... if you brought it contact me please 0400319777.
i know some of the buyers details... but not enough to contact them 😘
love matty
kif2 ·
Sorry Matty,
I didn't think I was going to win it.
Cheers, Darren.
shaven ·
kif2 wrote:Sorry Matty,
I didn't think I was going to win it.
Cheers, Darren.
if you thought that deep down we need to chat😍
ohhhh its you... darren, your not loved anymore ... we need to talk❗
secret message sent🥷
shaven ·
Major ·
Matt, I was only 10mins to late to buy this! Dame you!
What are the chances of another person in Ballarat looking for a type 3.
Like I said, if you ever think of selling it - let me know.
Cheers Paul.
dragsters for life ·
check your list then look at the car, nothing like what you were asking for in this thread but hell its a cool notch
paulr ·
Patient man Shaven!
shaven ·
Major wrote:Matt, I was only 10mins to late to buy this! Dame you!
What are the chances of another person in Ballarat looking for a type 3.
Like I said, if you ever think of selling it - let me know.
Cheers Paul.
had an interesting call today... you just never know🤪
Eccles wrote:check your list then look at the car, nothing like what you were asking for in this thread but hell its a cool notch
no true... but its nice. will cost Paul alot more😂
Paulr wrote:Patient man Shaven!
yes very... "watch this space"👍
shaven ·
re-thinking options...🙅
i have cash in one hand but no keys in the other... come on. i want something GOOD.
whats out there... even if you dont want to sell... just test the water... you may like the end result😘
look back through the thread... thats the kind of thing im after or the attached. sunroof is good (factory).
cheers matty
esevwbits ·
got a beauty for ya pm sent
shaven ·
esevwbits wrote:got a beauty for ya pm sent
hey ben,
mate no PM... nothing received🙁
Major ·
Matt, I think you need to get a really good notch / fasty and off load that crappy red one to me 😂.
Cheers Paul
shaven ·
Major wrote:Matt, I think you need to get a really good notch / fasty and off load that crappy red one to me 😂.
Cheers Paul
we will see... things take time + its amatter of finding someone that wants to actually sell their car...
they will😂
Major ·
shaven wrote:
Major wrote:Matt, I think you need to get a really good notch / fasty and off load that crappy red one to me 😂.
Cheers Paul
we will see... things take time + its amatter of finding someone that wants to actually sell their car...
they will😂
I will keep a look out for you and see what I can find 😎.
Cheers Paul
type3disease ·
here's one for you...!
right year range
right wrap around indicators
right state of australia
right interior with Z armrests (i know of two front seats in red to match i think)
right stud pattern
right amount of history
right right right....
right year range
right wrap around indicators
right state of australia
right interior with Z armrests (i know of two front seats in red to match i think)
right stud pattern
right amount of history
right right right....