Aussieveedubbers · Non-VW Engine Conversions

EJ22 Engine Mount Bolt Size

https://forums.aussieveedubbers.com/threads/83402/ej22-engine-mount-bolt-size

sirhendo · 1 May 2010, 9:12 am

Hi All,

First post here but have been lurking for a while and playing over at Kombi Club too. Love the site.

I have a 73 bay bus that has a Subaru EJ22 conversion. However, one of the engine mount bolts on the under side of the engine, closest to the gearbox, has fallen out and I need to bolt the donk back in.

Does anyone know the bolt size and thread for the underside bolts for the EJ22?

I've searched the forums but couldn't find anything.

Cheers!

Hendo

OZ Towdster · 1 May 2010, 9:38 am

M10 x 1.25 x what ever length you need

1303Steve · 1 May 2010, 10:52 am

Hi

Jap metric is pain, stupid cheap have a lots to select from or go to a nut & bolt shop.

Steve

sirhendo · 1 May 2010, 11:01 am

Cheers - thanks guys!

sirhendo · 1 May 2010, 2:37 pm

Lovely guys - Super Cheap had M10 X 1.25 X 25 and M10 X 1.25 X 45 bolts. Bought both as I wasn't quite sure of the bolt length.

I think the 25 length would do the trick just fine.

Works like a treat.

Thanks again for the info guys....and in such short time too....much appreciated!

👍

Hendo