ricko 路
jst wondering if anybody knows the difference between these boxes other than the casing,i have a 3 rib in front of 2lt engine and it doesnt seem to complain.......yet....thinking about upgrading but to what ?
Aussieveedubbers 路 Busses
what internal differences between 3 rib,5 rib, 6 rib gearboxes
https://forums.aussieveedubbers.com/threads/83977/what-internal-differences-between-3-rib5-rib-6-rib-gearboxes
bajachris88 路
I know that hte greater the 'rib' kombi box, the better highway speeds you get (without changing ur tyres). 3rib is the lowest ratio and 6 rib is the higher gearing of the three. You trade torque for better highway speeds by upgrading. (lower revs at higher speed)
If you havea 2 litre, then a 5 or 6 rib will do the job because a 6 rib is made for it, although u have less overall torque than your 3 rib, you engine can take it and shouldn't have an issue. Then you would end up with better high way speeds and top speeds.
One would assume to, that the 5 rib and 6 rib would be the stronger boxes of the two, seeing that they are made for the higher power output type 4 motor. and naturally, would have to be stronger to suit 馃憤
Is it a kombi or a offroad type 1? What do you use the car for? Just a daily?
If you havea 2 litre, then a 5 or 6 rib will do the job because a 6 rib is made for it, although u have less overall torque than your 3 rib, you engine can take it and shouldn't have an issue. Then you would end up with better high way speeds and top speeds.
One would assume to, that the 5 rib and 6 rib would be the stronger boxes of the two, seeing that they are made for the higher power output type 4 motor. and naturally, would have to be stronger to suit 馃憤
Is it a kombi or a offroad type 1? What do you use the car for? Just a daily?
STIDUB 路
i believe the 3/5ribs have gearsets that are made up of beetle parts, or they are interchangable to a degree,
the 6 rib has wider gears, hence its strength, the ribs around the case dont hurt in that aspect either, oh they are a bitch to get your hands on unless you have $$$
wait till dangerous sees the thread, im sure he can answer anything about the 3 馃憤
the 6 rib has wider gears, hence its strength, the ribs around the case dont hurt in that aspect either, oh they are a bitch to get your hands on unless you have $$$
wait till dangerous sees the thread, im sure he can answer anything about the 3 馃憤
Warrenm 路
This link with ratio descriptions may helpricko wrote:jst wondering if anybody knows the difference between these boxes other than the casing,i have a 3 rib in front of 2lt engine and it doesnt seem to complain.......yet....thinking about upgrading but to what ?
http://thekombikonnection.myfreeforum.org/about217.html
ricko 路
cheers for input,im currently rebuilding a 73 micro which the 3 rib box is in and want to have some fun with it and are interested in building up a beetle in the future for some serious tyre frying so i am stockpiling info and parts , strength is the main issue im after cheers