Can anyone give me feedback on a place that sells or rebuilds dual circuit master cyliders for a Type 3? Mine's cactus!
Cheers,
Steve
Hutcho ·
Aussieveedubbers · General Chit Chat
I think I'm in need on a new or rebuilt master cylinder...where do I go?
https://forums.aussieveedubbers.com/threads/85071/i-think-im-in-need-on-a-new-or-rebuilt-master-cylinderwhere-do-i-go
68AutoBug ·
Many VW owners send their master cylinders to a place in Lismore from Memory...Hutcho wrote:Can anyone give me feedback on a place that sells or rebuilds dual circuit master cyliders for a Type 3? Mine's cactus!
Cheers,
Steve
they put a stainless steel sleeve inside the cylinder and replace all the seals etc....
the stainless steel never wears out...
sorry, I can't remember the name I sent mine to..
was a few years ago....
cheers
LEE
1500S ·
You can still buy new dual circuit master cyls as far as I know Steve.Hutcho wrote:Can anyone give me feedback on a place that sells or rebuilds dual circuit master cyliders for a Type 3? Mine's cactus!
Cheers,
Steve
DH
type3lover ·
Did you try Tooley Imports? I think I got one from there a few years ago.
Hutcho ·
Excellent. Thanks guys, I'll call Tooleys tomorrow.
Cheers,
Steve
Cheers,
Steve
Phil74Camper ·
If not try all the usual places in Sydney:
H&M Ferman at Peakhurst - 9533 2722
Vintage Veedub Supplies at Campsie - 9789 1777
Volksbahn at Pendle Hill - 9688 2933
Klaack Motors at Fairfield - 9724 5901
Andrew Dodd Automotive at North Rocks - 9683 2184
Classic Veedub at Rydalmere - 9638 4200
Don't forget to check the wheel cylinders too...
H&M Ferman at Peakhurst - 9533 2722
Vintage Veedub Supplies at Campsie - 9789 1777
Volksbahn at Pendle Hill - 9688 2933
Klaack Motors at Fairfield - 9724 5901
Andrew Dodd Automotive at North Rocks - 9683 2184
Classic Veedub at Rydalmere - 9638 4200
Don't forget to check the wheel cylinders too...
robb ·
hi hutch
any good brake supply shop should be able to pressure test ya cycl and fix it then youll know for sure if thats the problem dont think new ones are cheap even lees way might be the way to go
any good brake supply shop should be able to pressure test ya cycl and fix it then youll know for sure if thats the problem dont think new ones are cheap even lees way might be the way to go
grumble ·
Any of the brake specialists will be able to help with a resleeving service,I use Newcastle Brake and Clutch who have the cylinder resleeved and then fit the kit,when we receive the cylinder it is ready to fit to the car.68AutoBug wrote:Many VW owners send their master cylinders to a place in Lismore from Memory...Hutcho wrote:Can anyone give me feedback on a place that sells or rebuilds dual circuit master cyliders for a Type 3? Mine's cactus!
Cheers,
Steve
they put a stainless steel sleeve inside the cylinder and replace all the seals etc....
the stainless steel never wears out...
sorry, I can't remember the name I sent mine to..
was a few years ago....
cheers
LEE
Hutcho ·
Thanks for that Phil.Phil74Camper wrote:If not try all the usual places in Sydney:
H&M Ferman at Peakhurst - 9533 2722
Vintage Veedub Supplies at Campsie - 9789 1777
Volksbahn at Pendle Hill - 9688 2933
Klaack Motors at Fairfield - 9724 5901
Andrew Dodd Automotive at North Rocks - 9683 2184
Classic Veedub at Rydalmere - 9638 4200
Don't forget to check the wheel cylinders too...
I called Tooleys this morning at 8.15. They'll have a new German master cylinder (just under $200) and a new OE German Brake Reservoir (about $36) delivered here this arvo.
Sweeet!
Thanks again guys.
Steve