Aussieveedubbers · General Chit Chat

oil coolers

https://forums.aussieveedubbers.com/threads/85493/oil-coolers

grogy · 19 Aug 2010, 3:39 pm

hi, im restricted for space.do u know of an oil cooler similar to rx mazda coolers, but not as deep. so 500mm by 50 by 80. the rx one is about 100, so too wide. thanks for u assistance...........greg ps with same b oil line outlet pattern as rx

bugzla · 19 Aug 2010, 4:48 pm

where are u putting it i put mine on top of the gerbox with ducting and it worked a treat

grogy · 19 Aug 2010, 5:22 pm

above trans, have an 091 in bug so not as much room

1303Steve · 19 Aug 2010, 6:19 pm

Hi

Put it up the front if your short on room.

Steve

grogy · 19 Aug 2010, 9:20 pm

i put it up front on my manx yrs ago, but dropped too much pressure

68AutoBug · 19 Aug 2010, 9:28 pm

bugzla wrote:where are u putting it i put mine on top of the gerbox with ducting and it worked a treat

any pics??

LEE

PS: there doesn't seem to be much room there.... lol

Newt · 19 Aug 2010, 10:23 pm

What size pump would you run if the cooler was up the front?

Cheers

Newt

1303Steve · 20 Aug 2010, 12:16 am

Hi

Im using a pump with 32 mm gears, I take the oil from the stock take off block position and no internal oil cooler.

Steve