RATAFIED ·
does anyone know the size or a part number of a fanbelt for a type 3 twin carb 1600
Aussieveedubbers · Type 3 and Karmann Ghias
WHAT fanbelt
https://forums.aussieveedubbers.com/threads/85533/what-fanbelt
1500S ·
9.5 x 1000 seems to ring a bell.
DH
DH
68AutoBug ·
Hi
Close Dallas... well OK for Your type 3 311 903 137A
and would probably fit OK... -62-66
but later models had 311 903 137B 67>on
which is 9.5 x 1006mm
or 10mm x 1005mm
from different sellers...
LEE
PS: get them from a VW parts shop.. will be cheaper too...
Close Dallas... well OK for Your type 3 311 903 137A
and would probably fit OK... -62-66
but later models had 311 903 137B 67>on
which is 9.5 x 1006mm
or 10mm x 1005mm
from different sellers...
LEE
PS: get them from a VW parts shop.. will be cheaper too...
1500S ·
One of the Septic Tanks had that size on The Samba Lee.68AutoBug wrote:Hi
Close Dallas... well OK for Your type 3 311 903 137A
and would probably fit OK... -62-66
but later models had 311 903 137B 67>on
which is 9.5 x 1006mm
or 10mm x 1005mm
from different sellers...
LEE
PS: get them from a VW parts shop.. will be cheaper too...
My Notch is 12 volt but it's too long ago since I put the belt on the engine! 2001 !! Not sure if there was a difference in the crank pulley from early to late ones. Who knows what I put on it. I had the original from the 6 volt but maybe I didn't use that one as well! I'll have a look on Sunday and see what belt is on it.
DH
RATAFIED ·
thanks heaps again guys