How much free play should a crank have without the flywheel attached. Does anyone have a copy of engine torques and specs they could email me
ianfoster7@bigpond.com
cheers
FOZ
chop-chop ·
Aussieveedubbers · Tech Talk
crank free play
https://forums.aussieveedubbers.com/threads/85619/crank-free-play
bajachris88 ·
0.07 - 0.13mm, if in excess, don't panic, larger shims are available to take up the slack... to a degree.
Stanley ·
http://www.thesamba.com/vw/archives/info/engine_build_sheet.phpchop-chop wrote:How much free play should a crank have without the flywheel attached. Does anyone have a copy of engine torques and specs they could email me
ianfoster7@bigpond.com
cheers
FOZ
1500S ·
To answer your question re WITHOUT the flywheel ..... HEAPS! It's whatever the axial clearance is on bearings 2 and 3 and it doesn't really matter. It's the clearance at bearing 1 when the flywheel is assembled that does matter. That amount given by Chris above.chop-chop wrote:How much free play should a crank have without the flywheel attached. Does anyone have a copy of engine torques and specs they could email me
ianfoster7@bigpond.com
cheers
FOZ
DH