updating post to end confusion VIN PLATE SHOWS IT'S A 136 SEDAN
If it dosn't match your budget then make me an offer.
Other parts (used) available, what do you need?
available in Newcastle 2305, contact me by PM or 0419240315 any time
Body (GONE) and guards all there (LH REAR GONE) though you would be desparate to want the body, hole cut in roof for sunroof and repairs started at rear screen. Excellent guards, doors, bonnet and deck lid.
Don
HEAPS MORE, PM WHAT U WANT
donn 路
Back seat (front seats sold), mags (14") . gotta clean the shed. 馃憤
Gearbox gone
nicolasw 路
gearbox?
donn 路
nicolasw wrote:gearbox?
Yep Now sold
cam070 路
Are the bonnet and boot seals the ones that fit the factory channels or the ones that attach to the bonnet and boot lids themselves? I believe these are called the Mexican seals. Also will they fit a 76 standard bug?
donn 路
Boot and bonnet seals
GONE
donn 路
good guards (LH REAR GONE) bonnet and decklid. make an offer for one or all
Front guards GONE RH rear still here
t_tuffnut 路
Any chance of a few pics of the guards etc?
donn 路
As Requested
donn 路
More
donn 路
Guards LHF GONE
donn 路
R H FRONT GONE
donn 路
R H Rear
68AutoBug 路
donn wrote:Bonnet seal def fits the body, not the bonnet, I'll check on the boot tomorrow, to my knowledge they will fit a standard but maybe someone here can confirm.
front bonnet on supers 1302 & 1303 are different to Non supers
engine lids all fit each other....
LEE
t_tuffnut 路
I'm saving for rego at the moment, which is really bloody annoying as I could use all of it.
If it is still there in January I would make you an offer.
Sorry that's not of much use to you, I know. At least it is a free bump.
DylanTheDubber 路
I Would Buy Most of this stuff off you donn, just spending some money on other stuff at the moment. If i get soem money soon you will be hearing from me.
+ Free Bump!!
From Dylan
donn 路
Glass gone
DylanTheDubber 路
Donn,
Arr Damm , There not the gaurds i want. arr well i'll find some. Speedo buisnes is ok im keen to get say 2 more before christmas i need to pay back some money and pay for some items.
From Dylan
Bizarre 路
馃憤
Thanks
newghia 路
Will that bonnet fit a 72 super ?
Nath
donn 路
68AutoBug wrote:
donn wrote:Bonnet seal def fits the body, not the bonnet, I'll check on the boot tomorrow, to my knowledge they will fit a standard but maybe someone here can confirm.
front bonnet on supers 1302 & 1303 are different to Non supers
engine lids all fit each other....
LEE
seems not 馃槧
DylanTheDubber 路
Donn,
i will take some stuff off you it's just i been realy busy and havent had a whole lot of spare money ill probly take the bonnet and front gaurds, Maybe the set.
Demister fan and some other stuff. got a price for me one those items?
From Dylan
Bizarre 路
newghia wrote:Will that bonnet fit a 72 super ?
Nath
nope - its about 200 mm shorther due tothe curved screen
t_tuffnut 路
You still got that shell you want to get rid of?
DylanTheDubber 路
Donn, do you still have rear L bug gaurds? how much for the pair? i just got my superbug last week and am working on it.
From Dylan
DylanTheDubber 路
Donn,
I Guess i'll grab the RHS rear gaurd then cause i have a LHS one but it is a bit beaten up but it will do untill i can get enough money for Rear Aero Gaurds.
The New Ride goin great. Im lucky i got to have a good hard drive on a nice old country road and then a bash in my mates paddock, Now shes in my shed down the back of my house in peices getting rebuilt. Im keeping it regoed to save blueslip hassles latter. The Body is pretty solid but alot of little repairs will be done where pannels are rusted and bend and dinged. This weekend i have been re-doing all the wiring as it was a real dodgey mess when i got it with alot of dogey repairs and added in wires everywhere for various different things. The Engine is a great runner but im going to do a top end engine rebuild just put new heads on it with a bit of head work done to em to give a bit extra power and run dual kadron 40mm carbys (same as Jeffs) and a full dress up kit and new bolt on bits including a high AMP Alternator.
From Dylan
toonyboy 路
Is this thread still active? I am looking for a low back driver's seat for a 1968 beetle, do you have one? Any idea on postage to sydney?
SebastienPeek 路
Free bump!
donn 路
in the next day or two I'll try to list anything still available, can't see any new pics happening though I can email them to you if required, taking a trip down to Nowra very soon if that helps with delivery
Thanks
Don
Joel 路
Don, did that bug by chance have a white stripe down the sides along the doors?
donn 路
Nope, just plain red, bits left over from a project.
donn 路
Found that tin ware Matt, still need it? PM sent
donn 路
Long time so clarification of model. SEE TITLE
donn 路
Cam070
PM replied to
donn 路
Bump
donn 路
Updated 6/7/15
Willie 路
Is the bonnet still available and can you get it to Sydney (or even better - Canberra)?
(It is for a 1303 L with the curved screen, isn't it?)
donn 路
Yes still here, getting to you is the problem, as it has been in storage for some time I just went down to check, it has a small area in the very front of the bonet that has been repaired, hard to see but shows filler less than 1 mm thick, otherwise extremely good, yes it's off a super fat chick.
Vin plate identifies it as a 136 sedan ......7/73
cb john 路
Donn, would you have a passenger side bonnet bracket?
donn 路
cb john wrote:Donn, would you have a passenger side bonnet bracket?
I'll get back to you, kinda recall seeing one in the stash, I'll check in the morning.
donn 路
Willie wrote:Is the bonnet still available and can you get it to Sydney (or even better - Canberra)?
(It is for a 1303 L with the curved screen, isn't it?)
Try Ben Robinson on Facebook, he's doing a trip Brisie to the Gong shortly, has an empty car trailer and a ute, he may be able to help if you are interested.
donn 路
donn wrote:
cb john wrote:Donn, would you have a passenger side bonnet bracket?
I'll get back to you, kinda recall seeing one in the stash, I'll check in the morning.
Sorry about the delay, can't help you with this, must have gone with the body, I've only got the deck lid brackets.
mbrallying 路
Gday Donn, just saw your thread and was wondering if you might have a pair of rear four stud beetle drums?
Thanks alot mate, Mark..
wazzas 路
do you have the boy by chance?
wazzas 路
that should read body
donn 路
Sorry mate body went yonks ago
donn 路
mbrallying wrote:Gday Donn, just saw your thread and was wondering if you might have a pair of rear four stud beetle drums?
Thanks alot mate, Mark..
I do believe I do but won't be home for a couple of weeks, check back with me the if your still looking
donn 路
mbrallying wrote:Gday Donn, just saw your thread and was wondering if you might have a pair of rear four stud beetle drums?
Thanks alot mate, Mark..