Hi All I have Got a 2.2 litre from a liberty, as it was pulled from the car, comes with harness, has pwr steering pump and aircon still attached, plus exhaust manifolds
Selling as no longer needed because I sold the project it was going into
has a some crack in the right hand timing belt cover and an alternator idler pulley is bent.
can send photo's (hopefully I'll post them anyway soon)
sold
or happy to swap for type one engine
Phone 0429200011 or PM/ email
Ballajura WA 6066
Thanks
Chris
psimitar 路
Oh if you weren't in WA I'd say yes. Just out of curiosity is it a series 1 or 2 engine?
Means an extra 10bhp 馃檪
Joel 路
That's only North America spec.
AUDM series 2 were only 8hp (6kw) less
EJ22 90-94 Power 100kW @ 6000rpm Torque 189Nm @ 4800-4800rpm
EJ22 95-96 Power 94kW @ 5200rpm Torque 190Nm @ 4000-4400rpm
EJ22 97-99 Power 98kW @ 5600rpm Torque 193Nm @ 4000-4000rpm
Desert Moose 路
its a 95 if that helps.
they all look the same to me...lol
let me know of a specific thing you would like a photo of and I'll do it while I take some pic's
Desert Moose 路
can get photo's of anything you need to see
Desert Moose 路
open to offers....
I have no need for this engine
psimitar 路
$250 you said aye? let me know how much it weighs so I can have a word with couriers.
It's very tempting 馃檪
Desert Moose 路
psimitar wrote:$250 you said aye? let me know how much it weighs so I can have a word with couriers.
It's very tempting 馃檪
$200 so it helps with Shipping
or to buy the beer to fit it
psimitar 路
but whats it weigh dude? need that for a courier quote and your postcode 馃檪
Desert Moose 路
psimitar wrote:but whats it weigh dude? need that for a courier quote and your postcode 馃檪
sorry missed that bit....lol
its heavy and its in Ballajurra WA 6066
I'll work out how to weigh it for you
gaz58t2 路
Hi
not sure if its the same as mine but does it have 3 or 2 wiring plugs hanging of the right side as can not see from pics
Cheers Gaz
Joel 路
Gen2 have the plugs bolted to the bellhousing
You can just see them under the intake donkey dick in the 1st pic
Fastie 路
It should weigh 130kg
psimitar 路
Oh, if it's 130kg then thats just over $200 to Brissy 馃檪 Hmmmm, oh wifey.........
DieSchnelleKafer 路
have you heard this thing run, what it like? how much effort to make it run?
Joel 路
Fastie wrote:It should weigh 130kg
Thats on the mark, my new engine with the a/c, powersteering, a tyre under the sump on the pallet was 137kg according to the shipping docket.
psimitar 路
Before I commit to buy dude what gaurantees can you give me that it runs with no known knocking, oil burning etc? Basically is it a sound engine?
Cheers,
mike
Desert Moose 路
psimitar wrote:Before I commit to buy dude what gaurantees can you give me that it runs with no known knocking, oil burning etc? Basically is it a sound engine?
Cheers,
mike
Well its a second hand engine, so for $200 I'm not giving any warranty or guarantee but It was a running engine and I can give you my word on that. It has a small crack in the timing case cover right hand side as you can see in the pic and a belt tensioner is bent as I have said before. The motor was pulled from a driving wreck and I was going to use the motor for a project buggy (which I put a 1600tp in and I'm selling soon). I'm happy for you to have someone from the forum here in WA to come and have a look at the engine before you buy it and in fact it would make me happier if you did.
Feel free to contact me if you like
Cheers
Chris
psimitar 路
Hiya Dude,
I'm not fussed about a crack in the plastic timing cover and a bent pully isn't really a worry either.
Not sure who or how I can get someone to look it over. If you know any other forums members near you that's cool but for $200 if you say it was running then I think I'm game 馃檪
Cheers,
Mike
Desert Moose 路
well work out what you would like me to do now.
and I'll get it on a skid and strap and rap it up
bigrudi 路
geez a 2.2 subaru for 200 bucks complete, the alternator is worth that much, if it was free they would want u to deliver cheap s/h engine
psimitar 路
PM me you bank details and address dude. The courier says to pick up they need either lifting equipment of your own or a strong chap to help lift it into the van.
Once I've deposited in your account and organised the courier, actually I need to know a date for the courier to come pick it up before I can book them.
Um, yea with those details done deal 馃檪
Cheers,
Mike
Desert Moose 路
pm sent
Newt 路
Mike,
If it doesnt get sold, Ill be in Perth in a couple of weeks time and can buy/find a use for it.