12V Wiper Wiring

Hey all.

I'm installing a 12V wiper motor into my car.


I just need a few pointers on which wiring goes to where.

The wiper motor has five posts on it. I'm fairly sure the one on the far left is the earth, but I have no idea what the others are for.








On the back of the switch there are 6 posts. Which are labeled as follows, clockwise from the top left.

31
31b
30
53b
53
53a





Can anyone advise what wires go where?

Thanks


Smiley 😎

Must be an aftermarket wiper motor.
OG ones have the corresponding terminals from the switch.

Connections on the switch are:

30 - 12volt power from fuse box
53 - Low speed
53b - High speed
31b - park wire
31 is usually not connected but it's just an earth.

Joel wrote:Must be an aftermarket wiper motor.
OG ones have the corresponding terminals from the switch.

Connections on the switch are:

30 - 12volt power from fuse box
53 - Low speed
53b - High speed
31b - park wire
31 is usually not connected but it's just an earth.

Ok cool.

What about 53a?
I just noticed that I put two 53b's in the post above. Have just corrected.



Smiley 😎