Advice needed for 58 model restoration

I am chasing a wiring harness for a 58 model beetle that caters for the semaphores and I was wondering if anyone can suggest a supplier of this. Also wondering if anyone can recommend a place in Queensland to do some re-chroming . Any other advice on suppliers for parts etc would also be appreciated

thanks

now im not sure, but with my oval i bought a LHD wiring harness because the harness runs on the RH side and then goes to the left.. so wat im gonna do is just cut it shorter were it meets with the dash, wont be 100% correct but with be correct and all done

go to this link its awesome look for the wiring diagrams and then just make your own I have.

http://www.vintagebus.com/

thanks for that