Doing a cleanup of yard still 馃檪 and have about 6 type 3 front beams early and late 71 and 72 discs n calipers still on stubs also front n rear seats to suit early wagon and notch plus some late rear seats also some random door trims to suit early wagon black n grey , arm rests for late hood linings with bows to suit making a pattern from Parts from free to $20 or offer me something for all my type 3 gear including a 64 notch with popouts n heaps of stuff for wagons too Had enough too much shit..
Klaus pm or call 0428 427 986 Dapto nsw 2530 will be home next weekend but not the longweekend anytime during the week if I'm home is fine.
Klaus 路
Found 2 sets of these in doing the fill a bus full of scrap yard cleanup if anyone wants them pm or call 0428 427 986 Klaus dapto nsw 2530 , will not post if no interest the scrap man will get them, can bring to berry or you can drop in on the way home and see what other stuff i can give away or sell.
they are off 70's bug front ball joint beams complete I dont have the beams though.
Klaus 路
have 2 of these one in bits the other complete but needs rebuild $50 or box of beer Klaus 0428 427 986
ttriebler 路
HOARDER!
bus914 路
Would you have a rear seat for a squareback?
Klaus 路
got a base for a late wagon in black good cond just dirty ,
thanks Todd I'm trying to share my problem 馃檪
And and a complete rear seat for an early wagon in black too no rips again just dirty
silver 路
can you give me more detail on the roof rack
Klaus 路
roof rack is bus and no bus stuff for sale yet and its not mine 馃檪
LIFE IN THE LOW LANE 路
Whats doing with the dual cab ute in first pic?? Is that going?
Klaus 路
not unless you got 3 grand , rusty rusty rusty but I'll get to it , its a 69 , I just regoed a 71 lowlight dc you can have that for 15 grand 馃檪
grumble 路
ttriebler wrote:HOARDER!
Yes we are,this is a common disease among Volksie people,that's what makes us loveable.馃槀
Klaus 路
still got 4 type 3 pans here about 5 bonnets, 7 x 1600 bus boxes and 9 busses, its not a problem , I did find a 93 rs liberty vented bonnet 馃檪 hiding
Klaus 路
here's a pic if anyone knows someone needing it $50
baghall 路
Gidday did you say you a had a bug front beam? Also am interested in the vent on the bonnet but you can have the money for the metal, if you are interested in selling the vent.
Klaus 路
vent is yours do you want metal cut around it for grafting ? I only have an early link beam that i can see but never know whats around under stuff馃槀. $20 or somewhere there abouts 馃檪
miikeboyle 路
Hey,
Any other early beetle stuff? or even later beetle stuff?
Klaus 路
I do have a 71 strut bug but its not here what you looking for ? I given away most of my early bug stuff when i sold cars
Klaus 路
more pics , wagon rear glass with trim also some windscreens shir rubber but trim is ok , other is wagon armrests and other trim , dont have time to post stuff so come and fill your car upl for cheap
Klaus 路
and more the quarter windows are early and late
Klaus 路
early steering columns $30 with steering wheel and this is the tubs of parts also some early notch doors $30 ea
Klaus 路
also have a 2ltr type 4 injected motor runs but bit smokey includes complete harness computer spare tinware spare fan housing and alt and heater boxes injected tank if you pay full price or can seperate also have spare injection harnes and computer/ injectors throttle body $1300
Saggas 路
holy moly!
do you have a salt n pepper drivers seat?
for an early square
daydreamer 路
would you have, amongst your treasures hoodliner bows for a kombi, in need a set for full length hoodliner ?
Klaus 路
only s/p seats i have are in the notch youd have to buy the whole car to get them 馃檪 , how many bows is there in a full headling? I have some 3 or 4 but you could make them out of spring steel
grinderman 路
Any straight late square/fastback bumpers front or rear?
Klaus 路
think i have a "not too bad " rear one for a late.. will check
rowansnow 路
Did you say you have a good 72 Squareback Hoodlining?
Klaus 路
i have one or 2 but might only be good for patterns will roll them out and see what they are like
rebel 路
any type 3 dash pads???
also chasing short chrome rear reflectors for 68
how much for type 3 motor
cheers rob
Klaus 路
I have a 1500 type 3 motor twin carb but single port converted to 12v runs alright complete ready to bolt in $500
another 1600 dp twin carb runs but has dropped guide complete $500 its in the notch.
have long chrome ones may have short will look thru the box of bits, dashs are all late and cracked i can get a crack free early but $1000 and its yours 馃檪
Klaus 路
have also cut the grass and found a complete type 3 irs subframe rolling on rims also have just the subframes and also have 2 swing axle type 3 ones aswell.(ones with the forkes )
Hutcho 路
Hi mate. After front and rear window trim. Do you have a good set? If so, I bags them. How much?
Cheers,
Steve
Klaus 路
there was a pic showing 3 front screens with trim still in the rubber cars are from the 60's and 70's they have wear but no dings just need a polish
Hutcho 路
PM'd
baghall 路
Klaus wrote:vent is yours do you want metal cut around it for grafting ? I only have an early link beam that i can see but never know whats around under stuff馃槀. $20 or somewhere there abouts 馃檪
No need for metal as vent is going into a fiberglass bonnet. Will pick up when I get gearbox. Thanks
PS will be going to berry on 3rd but unsure when I will get there atm.
baghall 路
Klaus, just looking through photos and am wondering how you can move around the yard to mow. You'd have to use a whipper snipper surely.
Klaus 路
at the moment its a squeeze but most cars run or push power , in a month most will be gone 馃檪
customxxx 路
Regarding the Liberty RS bonnet, is there any dents and whats the overall condition? Interested.
Thanks.
Klaus 路
vent for bonnet is spoken for and bonnet is now jammed into a bus to act as a side door , it was dent free... oops its still not bad but scrap guy is coming tomorrow, try engine importors as this was off a jap spec legacy on one of the frontcuts i bought
pickstock 路
strange request but you seem to have some type 4 gear
do you have any second hand cv joints? just need for measurements and mock ups but the better condition well the better?
vlad01 路
don't forget those vent wings 馃榾
Klaus 路
i have a few but would have to pull apart to check cond as i reuse them alot, unless they are fkd 馃檪 .the window uprights that your after that the catch locks onto ..all mine are aluminium
vlad01 路
ok? so no "N' model frosted silver ones?
if not some real nice Al wings would be ok too as I could get them re-anodized (clear anodizing) if necessary or clear aluminum 2pak coating, por15 of course 馃憤
All the ones I have had have not been real good to start with so making difficult to get decent results with.
whole assemblies would be better option I think so I have a large selection of parts I can work with. So a left and right, for *late model*