Hi...
What is the best way of lowering a 1302S at the front and rear? Can I use dropped splidles?
Cheers
Jay
64Samba ·
Aussieveedubbers · Tech Talk
Lowering a 1302S
https://forums.aussieveedubbers.com/threads/9179/lowering-a-1302s
Bizarre ·
The BEST way to lower a super is with adjustable struts like this
Bizarre ·
another shot
Bizarre ·
Car ends up like this
Bizarre ·
Read the follwoing link by Steve C
http://www.clubvw.org.au/struts.htm
also go to www.superbeetlesonly.com and then go to tech and stuff and read the articles there
BEFORE you lower work out what wheels you are going to run. If you want wide (6" or 7" ) on the front you need thinner springs. If you want stock, you could get away with just lowering the perch and running stock springs.
http://www.clubvw.org.au/struts.htm
also go to www.superbeetlesonly.com and then go to tech and stuff and read the articles there
BEFORE you lower work out what wheels you are going to run. If you want wide (6" or 7" ) on the front you need thinner springs. If you want stock, you could get away with just lowering the perch and running stock springs.