For Sale - Beetle Parts - BUMP

zayus · 10 Aug 2011, 3:56 pm

For Sale

Want to get rid of this stuff, ASAP.

Beetle Parts mostly to suit 1958 - 1967

Items for sale include, original mirrors, a 28 blade fan, and Type 3 single port carbs with manifolds

Parts are in used condition.
The condition of each part, varies from good to rusty to smashed.
Happy to answer any questions.

Name: Bryce
Contact: PM
Location: Berowra Heights, 2082 NSW

Payment method: bank transfer, cash, Paypal
Delivery: prefer pick up for large items, happy to post reasonably sized items at the buyer's expense.

Thanks,
Bryce

For Sale

Exterior trim, mirrors, bumpers etc

* Exterior aluminum side trim $40.00
SALE PENDING
Condition - fair. Left rear side missing, but there is a spare door piece

* Two bootlid handles - no keys
1 -$20.00 and 2 -$15.00
1 - good condition, lock looks worn
2 - fair condition, some pitting, lock looks in good shape

* Bullet mirror (RHS) $15.00 ONO
Condition: Perfect for a rat

* Three early '60s Pear shaped mirrors - (RHS)
$30.00, $25.00 & $20.00 ONO
Condition - good to fair

* Over riders - small, original $30.00
Condition - chrome is shiny. Very slight damage on
2 of the over-riders. See pictures.

Miscellaneous

* Gas cap, 68 onwards - $5.00

Interior

* Vent window frame (LHS) $5.00
Condition - bright, but pitted

* '66-'67 Interior mirror frame - no mirror $5.00
Condition -

* Early '60s interior mirror and sun visors $40.00
Condition - some pitting on the mirror, sun visors - SOLD

* Pricol gauges - dated 1991.
Faces & chrome bezel in very good condition
$30.00 (the lot)
Condition - working when removed from my car... in 1999.

Oil pressure - mechanical, requires oil pressure line
Amps - electric
Temperature - electric
Volts - electric

* Custom door handle & window winder - 1 side only
$5.00

* Wooden gearshift knob
Specifically for 3 speed VW Stickshift and Porsche
Sportomatic - Displayed: 3 speed dog leg & reverse
$10.00

* Interior door handle surrounds - 1968 onwards $5.00

Engine

* 28 blade fan - Condition - good
* Pully 1600 - Condition - incomplete, front side only
* Shims & nut
* Backing plate,
* Gen/alternator clamp
The lot - $35.00

* Dual port intake manifold $40.00
Part # - 113 129 701 AE

* Single port intake manifold - 5.00
Condition - hole in one of the heat riser tubes
Part # - 113 129 701 J

* VDO fuel tank float - condition unknown $5.00
Part # - VDO 21 132 3 63

* Knecht oil bath air cleaner - rusty $5.00
Part # - LB 624 -113 129 611b

* Oil filler - 1500, 1600 - Condition - rough.
* Oil caps 1 - 1200, 2 - 1300
* Generator pullys 1 - 1200, 2 - 1300
Condition - incomplete, front side only
* Generator stand with oil filler - 6 Volt: 1200, 1300
the lot - $12.00

* Carbs - 1) Solex 30 PICT - $10.00
Solex 30 PICT 1 - made in Australia
Bexdix Tecnico Automotive Pty Ltd

2) - Solex 34 PICT - SOLD

Condition: NOT WORKING.
The case of each carb may suit a restoration

* Type 3 twin carbs/single port manifolds - $50.00
Condition: SOLD

Left: Solex 32 PDSIT - 2
Right: Solex 32 PDSIT - 3
Made in W.Germany
Deutsche Vergaser GESELLSCHAFT

* Exhaust pipes (pea shooters) gasket kit - $10.00
Condition - like new, never used.

* Heater Boxes - original $50.00
Condition: working, no holes, oil cleaned off, re-painted

Body

* W decklid $30.00
Condition: smashed, but no rust!

Thanks,
Bryce

zayus · 10 Aug 2011, 4:03 pm

Image 1 -
Exterior aluminum side trim $40.00

Image 2 -
T-handle - good condition, lock is worn. $20.00

Image 3 -
T-handle - fair condition, some pitting, lock in good shape $15.00

zayus · 10 Aug 2011, 4:08 pm

Images 1 & 2 -
Bullet mirror (RHS) $15.00 ONO

zayus · 10 Aug 2011, 4:16 pm

Vitaloni California mirror(RHS) SOLD

The mirror helped Niki Lauda win the 1975 and 1977 Formula 1 World Championship.

zayus · 10 Aug 2011, 4:20 pm

Images 1 & 2
Three early '60s Pear shaped mirrors - (RHS)
Left $30.00
Centre $25.00
Right $20.00

zayus · 10 Aug 2011, 4:33 pm

Image - 1
Gas cap, 68 onwards $5.00
Gas cap, early to mid '60's SOLD
Vent window frame (LHS) $5.00
'66-'67 Interior mirror frame/no mirror $5.00

zayus · 10 Aug 2011, 4:37 pm

Image 1 -
Early '60s interior mirror and sun visors $40.00
A little pitting on the mirror frame.
No tears in the sun visors SOLD

Image 2 -

* Custom door handle & window winder - only 1 side
$5.00
* Wooden gearshift knob for 3 speed semi auto VW or 912
$10.00

Image 3 -

* Pricol gauges
- Temperature
- Oil pressure
- Amps
- Volts
$30.00

zayus · 10 Aug 2011, 4:43 pm

Image 1 -
Interior door handle covers - 1968 onwards $5.00

Image 2
* 28 blade fan
* Pully 1600
* Shims & nut
* Backing plate,
* Gen/alternator clamp
$35.00 for the lot

Image 3 -
Dual port intake manifold $40.00 ONO
Part # - 113 129 701 AE

zayus · 10 Aug 2011, 4:51 pm

Images 1 & 2 -
Single port intake manifold $5.00
Condition hole in one of the heat riser tubes

Image 3

VDO fuel tank float - $5.00
Part # - VDO 21 132 3 63

Knecht oil bath air cleaner - $5.00
Part # - LB 624 - 113 129 611b

Dizzy - gone

zayus · 10 Aug 2011, 4:57 pm

The lot - $12.00

Image 1 -
Oil filler - 1500, 1600

Image2 -
Oil caps 1200, 1300
Generator pullys 1200, 1300 (front side only)

Image 3 -
6 volt Generator stand with oil filler

zayus · 10 Aug 2011, 5:02 pm

Image 1 -

Left: Solex 34 PICT 34 - made in W.Germany
Deutsche Vergaser Gmbh and Co KG
SOLD

Right: Solex 30 PICT 1 - made in Australia
Bexdix Tecnico Automotive Pty Ltd
$10.00

Image 2 -

Type 3 twin carbs/single port manifolds - SOLD
Left: Solex 32 PDSIT - 2
Right: Solex 32 PDSIT - 3
Made in W.Germany
Deutsche Vergaser GESELLSCHAFT

Image 3 -

Exhaust pipe (pea shooters) gasket kit
Like new/never used $5.00

zayus · 10 Aug 2011, 5:07 pm

Image 1 -
W decklid (front)

Image 2 -
W decklid (inside)

$30.00 SALE PENDING

zayus · 10 Aug 2011, 5:12 pm

Updated - rims are going to eBay.

zayus · 10 Aug 2011, 5:15 pm

Images 1 & 2 -
Heater boxes - $40.00
Condition working, no holes, no oil stains, re-painted

Pumba · 10 Aug 2011, 5:31 pm

The over riders for blades,are the 2 outside ones dented???
cheers shane.

waltermitty · 10 Aug 2011, 5:41 pm

Hi, Bryce Pm sent re the german 34 pict please? early gas cap the rusted dissy and the guages. Mitchell

patbot · 10 Aug 2011, 7:17 pm

I never know if my PMs are successful, but I'll gladly take the 4R2 dizzy off your hands if it is indeed free and still available!

zayus · 10 Aug 2011, 9:09 pm

vwmad wrote:The over riders for blades,are the 2 outside ones dented???
cheers shane.

Hi Shane,

The over-rider furthest to the left does have a small dent in it.
The over-rider furthest to the right, I will check tomorrow.

Thanks,
Bryce

zayus · 10 Aug 2011, 9:10 pm

waltermitty wrote:Hi, Bryce Pm sent re the german 34 pict please? early gas cap the rusted dissy and the guages. Mitchell

Hi Mitchell ,

PM sent.

Thanks,
Bryce

zayus · 10 Aug 2011, 9:11 pm

patbot wrote:I never know if my PMs are successful, but I'll gladly take the 4R2 dizzy off your hands if it is indeed free and still available!

Hi Patbot,

The rusty dizzy has been taken.

Thanks,
Bryce

vwbugsrule · 10 Aug 2011, 9:11 pm

Hi mate, if the heat riser tubes in that single port manifold are not clogged up, i will take it. By the way will that fit my standard 1200cc 40hp motor ??

Anthiron · 10 Aug 2011, 9:29 pm

Hi mate can i have the Bugspray instructions? want some coin for an envelope and stamp?

zayus · 11 Aug 2011, 9:49 am

vwbugsrule wrote:Hi mate, if the heat riser tubes in that single port manifold are not clogged up, i will take it. By the way will that fit my standard 1200cc 40hp motor ??

Hey Mate,

I will take a look @ the manifold for you today, and confirm if the heat riser is clogged, and whether it will fit a 1200.

Bryce

zayus · 11 Aug 2011, 9:51 am

Anthiron wrote:Hi mate can i have the Bugspray instructions? want some coin for an envelope and stamp?

Hey hey,

Anithron, PM me your address, and I will mail it to you. No need for coin or a stamp. Glad you can use the instruction sheet.

Bryce

donn · 11 Aug 2011, 10:00 am

interested in the electric fuel pump and will be down your way in the next day or two, can I drop in to check it out / pick up? address?
Thanks
Don

Oshea22 · 11 Aug 2011, 4:56 pm

Hi Bryce,

Are the bars for $200 still for sale and will they fit a 64 beetle?

zayus · 11 Aug 2011, 9:41 pm

Oshea22 wrote:Hi Bryce,

Are the bars for $200 still for sale and will they fit a 64 beetle?

Hi,

The bumpers are still available.
They will fit a 64 Beetle.

Thanks,
Bryce

zayus · 11 Aug 2011, 10:04 pm

donn wrote:interested in the electric fuel pump and will be down your way in the next day or two, can I drop in to check it out / pick up? address?
Thanks
Don

Hi Don,

Sent you a PM, re: the fuel pump.

Oshea22 · 11 Aug 2011, 10:21 pm

zayus wrote:
Oshea22 wrote:Hi Bryce,

Are the bars for $200 still for sale and will they fit a 64 beetle?
Hi,

The bumpers are still available.
They will fit a 64 Beetle.

Thanks,
Bryce

Hi Bryce,

Thanks for the reply. What sort of nick are they in? I would like to buy them from you depending on the condition. I'm from Canberra and would come up to get them, but by chance r u near any couriers places?

Cheers

Adrian

donn · 11 Aug 2011, 10:30 pm

No PM

zayus · 12 Aug 2011, 1:59 pm

donn wrote:No PM

Sent another PM, re: the electric fuel pump.

Bryce

zayus · 12 Aug 2011, 2:11 pm

Oshea22 wrote:
zayus wrote:
Oshea22 wrote:Hi Bryce,

Are the bars for $200 still for sale and will they fit a 64 beetle?
Hi,

The bumpers are still available.
They will fit a 64 Beetle.

Thanks,
Bryce
Hi Bryce,

Thanks for the reply. What sort of nick are they in? I would like to buy them from you depending on the condition. I'm from Canberra and would come up to get them, but by chance r u near any couriers places?

Cheers

Adrian

Hi Adrian,

The bumpers and the over-riders are in very good condition - they are straight.

There is a very minor kink in one of the bumpers, and a little patch of surface pitting.

I will get a few more pictures of the bumpers and send them to you via PM.

Delivery, all the major couriers & Australia Post can deliver the bumpers to you. I will try and find the weight of the bumpers for you.

Bryce

Anthiron · 12 Aug 2011, 3:15 pm

Sent you a PM Zayus 🙂

zayus · 12 Aug 2011, 7:11 pm

vwbugsrule wrote:Hi mate, if the heat riser tubes in that single port manifold are not clogged up, i will take it. By the way will that fit my standard 1200cc 40hp motor ??

Sorry for the late response.
I check for you tomorrow - Saturday.

Thanks

vwking · 13 Aug 2011, 5:54 am

hi any chance of a copy of the bugspray carb instruction sheet

Skremn01 · 15 Aug 2011, 1:07 am

you wouldnt happen to have a set of front seats for a 63 would you?

Type3Sicko · 16 Aug 2011, 12:38 am

Bryce, You have PM regarding type 3 single port carbies... And you can add a pair of pear shaped wing mirrors. Cheers and bump!

Skremn01 · 16 Aug 2011, 3:29 am

hey man interested in the air cleaner

david777 · 16 Aug 2011, 2:04 pm

PM sent

zayus · 16 Aug 2011, 8:23 pm

vwking wrote:hi any chance of a copy of the bugspray carb instruction sheet

Hi VWKing,

The Bugspray instructions have been taken.

Thanks,
Bryce

Oshea22 · 16 Aug 2011, 9:32 pm

zayus wrote:
Oshea22 wrote:
zayus wrote:
Oshea22 wrote:Hi Bryce,

Are the bars for $200 still for sale and will they fit a 64 beetle?
Hi,

The bumpers are still available.
They will fit a 64 Beetle.

Thanks,
Bryce
Hi Bryce,

Thanks for the reply. What sort of nick are they in? I would like to buy them from you depending on the condition. I'm from Canberra and would come up to get them, but by chance r u near any couriers places?

Cheers

Adrian
Hi Adrian,

The bumpers and the over-riders are in very good condition - they are straight.

There is a very minor kink in one of the bumpers, and a little patch of surface pitting.

I will get a few more pictures of the bumpers and send them to you via PM.

Delivery, all the major couriers & Australia Post can deliver the bumpers to you. I will try and find the weight of the bumpers for you.

Bryce

Hi Bryce any further info on the bars mate, still keen to buy them

Cheers

Adrian

zayus · 16 Aug 2011, 10:01 pm

Skremn01 wrote:hey man interested in the air cleaner

Skremn01 wrote:you wouldnt happen to have a set of front seats for a 63 would you?

Hey hey,

I don't have any front seats for a '63.

The aircleaner, it's yours, I will PM you.

zayus · 16 Aug 2011, 10:02 pm

Type3Sicko wrote:Bryce, You have PM regarding type 3 single port carbies... And you can add a pair of pear shaped wing mirrors. Cheers and bump!

PM sent

Type3Sicko · 17 Aug 2011, 7:47 pm

Received and replied to, cheers!

zayus · 17 Aug 2011, 11:10 pm

Skremn01 wrote:hey man interested in the air cleaner

PM sent

Oshea22 · 17 Aug 2011, 11:39 pm

zayus wrote:
Oshea22 wrote:
zayus wrote:
Oshea22 wrote:Hi Bryce,

Are the bars for $200 still for sale and will they fit a 64 beetle?
Hi,

The bumpers are still available.
They will fit a 64 Beetle.

Thanks,
Bryce
Hi Bryce,

Thanks for the reply. What sort of nick are they in? I would like to buy them from you depending on the condition. I'm from Canberra and would come up to get them, but by chance r u near any couriers places?

Cheers

Adrian
Hi Adrian,

The bumpers and the over-riders are in very good condition - they are straight.

There is a very minor kink in one of the bumpers, and a little patch of surface pitting.

I will get a few more pictures of the bumpers and send them to you via PM.

Delivery, all the major couriers & Australia Post can deliver the bumpers to you. I will try and find the weight of the bumpers for you.

Bryce

Hi Bryce, sent you a PM not sure if it went through or not

zayus · 26 Aug 2011, 5:38 pm

Bump

Updated, re: price adjustments.

zayus · 26 Sep 2011, 1:56 pm

BUMP

Type 3 single port twin carbs available.
Condition - NOT Working

$50.00

zayus · 17 Oct 2011, 11:12 am

Bump

5lam · 17 Oct 2011, 12:44 pm

Has the W decklid sold??

phoenix_dr · 17 Oct 2011, 10:17 pm

hey mate is that bullet mirror still for sale?

zayus · 18 Oct 2011, 9:14 pm

BlackBug wrote:Has the W decklid sold??

Hi Blackbug,

The sale is pending.
The decklid is on hold at the moment, for another member of the forum.

Thanks,
Bryce

zayus · 18 Oct 2011, 9:15 pm

phoenix_dr wrote:hey mate is that bullet mirror still for sale?

Phoenix_dr,

The bullet is mirror is still for sale.
Would look great on a rat!

Dr.Zayus

whatnow · 19 Jan 2012, 10:12 am

pm sent.

whatnow · 21 Jan 2012, 9:04 am

does anyone have zayus's contact details? i'm keen to buy something but will be heading home soon.

69bug · 21 Jan 2012, 10:46 pm

will those type 3 single port dual carbs go on a bug?

hellbugged · 22 Jan 2012, 7:16 pm

whatnow wrote:does anyone have zayus's contact details?

I'm after his contact to get some bits too if possible!!!

cheers