Is it possible? I've got a Britax ragtop out of a beetle and was wondering if it will fit into a Notch or is the shape wrong?
Graham
11CAB 路
Aussieveedubbers 路 Paint and Body
Britax Sunroof in a Notch
https://forums.aussieveedubbers.com/threads/9291/britax-sunroof-in-a-notch
Tazz 路
Just bring it around!
I have a welder and a 9inch grinder!
馃槑
I have a welder and a 9inch grinder!
馃槑
72TWINCAB 路
I've got a hammer if you need it.
Herbie 路
Do you need left or right handed tinsnips?馃榾
If it doesnt fit, just keep cuttin.
Convertables are cool 馃榾
Just make some cardboard templates and see if its close or find a wreck to test it on, if wrecks are available,{me not know how rare}
Cheers Tony
If it doesnt fit, just keep cuttin.
Convertables are cool 馃榾
Just make some cardboard templates and see if its close or find a wreck to test it on, if wrecks are available,{me not know how rare}
Cheers Tony
11CAB 路
So the consensus is to just start hacking......
馃榾馃榾馃榾馃榾馃榾馃榾
馃榾馃榾馃榾馃榾馃榾馃榾
Tazz 路
Yeh... why not!
[Edited on 12-8-2003 by Tazz]
[Edited on 12-8-2003 by Tazz]
KruizinKombi 路
You should be able to make it fit. If necessary, a little bit of gentle bending may be required to make it suit the profile of the new roof, which alters the overall dimensions. 馃檪
11CAB 路
11CAB 路
another
Andy 路
Why not try to find the roof of a wrecked type 3 for a practice run??
:thumb
:thumb
RSI 路
hack,hack,hack just do it! "hey mabee that could be a Tshirt"
Tazz 路
I had a spare roof you could have played with...
11CAB 路
it hasnt gone yet...........
couple of minutes with that nine inch of yours....馃榾
couple of minutes with that nine inch of yours....馃榾