Hi,
I just want to know what is a reasonable price for a couple of second hand dellorto 40mm.
If anyone can give me an idea about the price that will be great.
Thank you.
Nino
kodokmerahjambu ·
Aussieveedubbers · Buying, Selling & Swapping Parts
dell 40mm asking price
https://forums.aussieveedubbers.com/threads/93581/dell-40mm-asking-price
matberry ·
Hard to say... $200 - $600 depending on condition, what they are off, etc.
Bizarre ·
You talking complete with manifolds, linkage and filters??
kodokmerahjambu ·
Hi thank you for the quick reply.
No, I am after the carbies themselves. I already got the manifolds, linkage and filters. I had 36mm Dells but want to go bigger but not to big. I'm increasing the engine capacity from 1641cc to 1776cc.
Sorry if I've gone into technical details, just want to clear out why I just want the carbies themselves.
Cheers,
Nino
No, I am after the carbies themselves. I already got the manifolds, linkage and filters. I had 36mm Dells but want to go bigger but not to big. I'm increasing the engine capacity from 1641cc to 1776cc.
Sorry if I've gone into technical details, just want to clear out why I just want the carbies themselves.
Cheers,
Nino
Bizarre ·
36 dells will be fine if you have 32 vents and 135 mains
Otherwise look here
http://www.ebay.com/itm/VW-PORSCHE-DELLORTO-DRLA-40-CARBURETORS-/260862542918?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item3cbc9e8446
Otherwise look here
http://www.ebay.com/itm/VW-PORSCHE-DELLORTO-DRLA-40-CARBURETORS-/260862542918?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item3cbc9e8446
matberry ·
x2
Stick with the 36's, unless you've got big heads and/or rpm
Stick with the 36's, unless you've got big heads and/or rpm
waveman1500 ·
If you're selling some 36mm Dellortos I'd be keen for them!