Aussieveedubbers 路 Buying, Selling & Swapping Cars

1969 TYPE 3 SQUAREBACK

https://forums.aussieveedubbers.com/threads/94451/1969-type-3-squareback

RighteousK 路

For images go to: http://www.kombisales.com.au/kombi-for-sale/1969-vw-type-3-squareback

This is a 69 model type 3 so has late running gear but still the nice looks of the early models. This would make a great first project for someone as a lot of the work has already been done. No welding is required and it is already in primer and half rubbed down. Not much work to get it in paint and put it back together and it'll nearly be ready to be registered.

It runs and drives well and the brakes, steering and suspension all appear to be good. All it needs is a new handbrake cable and a leak fixed in the exhaust.

Comes with most of the parts to put it back together, if not all, I haven't really checked.

Call Jared on 0413-262-932
Location: Calga, NSW Central coast (Near Kariong)
Price: $1,500

buzz 路

if only you was in tas 馃檨

RighteousK 路

Price revised to $1,500. It's got to go, I have no time to fix this.

Did I mention is does run and drive quite well and shouldn't take much work to get it on the road.

shaven 路

RighteousK wrote:Price revised to $1,500. It's got to go, I have no time to fix this.

Did I mention is does run and drive quite well and shouldn't take much work to get it on the road.
who did the rust / panel work?
has it all gone? the centre side windows are they pop outs or fixed?
what does the inside look like? under the bonnet & with the rear hatch up?

RighteousK 路

Hey mate. If your interested, pick up the phone and call me and I can answer any questions. Cheers, Jared

shaven 路

RighteousK wrote:Hey mate. If your interested, pick up the phone and call me and I can answer any questions. Cheers, Jared
it was also for other ppl Jared... just helping as well.馃槝
calling馃槀

RighteousK 路

Sorry mate. Nice chattin to you though. As I said on the phone, the bodywork was done by the guy I bought it off, there is probably a little bit of bog in it but it looks to be not a bad job. The worst of the rust is in the floor where the battery is might need a plate welded in.

I have posted some more photos of the interior to my website. Sorry that they aren't very good, all the parts are in it at the moment as I have nowhere else to keep them.

shaven 路

thanks jared... mate good to chat. hope all goes well with it