Aussieveedubbers · Tech Talk

wiring loom

https://forums.aussieveedubbers.com/threads/94919/wiring-loom

clyve ·

does anybody know where i can get a complete loom for a 72 bug and also where does the wire off the -ve terminal on the coil go to please
(down the harness under the seat?)
cheers

68AutoBug ·

clyve wrote:does anybody know where i can get a complete loom for a 72 bug and also where does the wire off the -ve terminal on the coil go to please (down the harness under the seat?)
cheers

--- ve

the Negative Terminal is connected to the distributor
the Positive to the ignition [power]

do You have a pic of the engine?

a Complete wiring loom [new] is Very expensive.... $$$$

sounds like someone has been fiddling/modifying the wiring??

cheers

LEE

AA003 ·

clyve wrote:where does the wire off the -ve terminal on the coil go to please
The -v wire (1) goes to the points. If there is a second wire, it goes to the VW Diagnosis socket or it is non standard which could be a tacho or engine immobilser/alarm.

clyve ·

thanks for the help. I have two leads on the coil on the positive side? plus the one to the fuel solinoid and choke.
there should be one according to haynes manual.
The plug on the back fire wall i take is the test point. do i need this or can I rewire with out it, there seems to be shit loads of wires so I am going to start again.
any tips
cheers

AA003 ·

You can delete the socket and its associated cables.