Type 3 Fastback / Notch Project.

Howdy all,

I am looking for either a type 3 fastback or notch project. Preferably a complete car. Condition I am not so concerned about as I am wanting something to restore.

Looking at around $1500.

Cheers Paul.

hey paul...
mate contact ben (type3disease)... he has a nice red one... a little more then what you want to spend. but very nice. (thats if he wants to sell it)🤪

Cool thanks.

I know Ben, spoke with him a year or so ago when I was looking for a type 3 as a daily driver. Unfortunately circumstances changed at that time and I had to put that idea on ice. So now I just want a type 3 to sink my teeth into. Don't really want to spend anymore then $1500, but if the right car came along I might consider it.

Cheers Paul

i have a 65ish body on a 70's floorpan... no motor or interior
fairly complete otherwise or if not I should be able to help with some bits...

it has a roll cage in it - i was gonna build a salt lake race car with it... but it would also make a hot streeter

welcome to come have a look... but I'm heading interstate in a few weeks so it might need to be sooner than later...
😀

cheers Ben

Thanks for the heads up Ben. Will keep it in mind. Really want to try and get a complete car if possible.

Are you heading interstate for good, or just holidays? If you are going for good I am sure you wont be able to take all your type 3's with you! I can offer a good home! 😁

got a rough but fixable 64 notch can include popouts n spare doors n late pan and complete but worn salt n pepper interior for 1500 but am in wollongong also comes with 1500 twin carb single port motor converted to 12v might be missing a couple of side trim but easy enough to find

Major wrote:Thanks for the heads up Ben. Will keep it in mind. Really want to try and get a complete car if possible.

Are you heading interstate for good, or just holidays? If you are going for good I am sure you wont be able to take all your type 3's with you! I can offer a good home! 😁

Work - anywhere from 3monhs to two years at this stage
Sold a couple - keeping a couple - the race car is the only one really still up in the air... : )

Klaus - I will have a bit of a think about it. If you where is Vic I would be interested, however frieght would probably be a killer and I don't have the time to come and collect myself. However I will not rule it out completely.

Ben - how much you thinking for the race car?

Cheers Paul.

sent a pm with some pics Paul - let me know if the pics work...
cheers Ben

try rick at volksrecycle too he has a nice sunroof roof notch woth no motor but im pretty sure he will have a motor aswell, im going to see him right now if you would like some pics?

Klaus wrote:got a rough but fixable 64 notch can include popouts n spare doors n late pan and complete but worn salt n pepper interior for 1500 but am in wollongong also comes with 1500 twin carb single port motor converted to 12v might be missing a couple of side trim but easy enough to find

where's the pics sweetie?

see here they are , its special but has heaps of spares , pauly "h" is doing a run thru this area down to melb in march /april he might be able to help

it has been dragged out of its current resting place and is easier to get to ..sortof..kisses matty

Klaus wrote:it has been dragged out of its current resting place and is easier to get to ..sortof..kisses matty

thankyou😘

dragsters for life wrote:try rick at volksrecycle too he has a nice sunroof roof notch woth no motor but im pretty sure he will have a motor aswell, im going to see him right now if you would like some pics?

Pics would be good, I would be interested if it is in my budget.

Thanks, cheers Paul.

Klaus wrote:see here they are , its special but has heaps of spares , pauly "h" is doing a run thru this area down to melb in march /april he might be able to help

Thanks Klaus. I will consider it. Hows the rust situation on it?

its a type 3 🙂 enough said ha ha , pan needs work sills need work below front screen lower sides of rear screen , doors eh have decent spares roof ok gurads need fixing , thats why vicelores one is the $$ it is as its clean og clean , its the sum of its parts pretty much if i were to wreck it

Klaus wrote:its a type 3 🙂 enough said ha ha , pan needs work sills need work below front screen lower sides of rear screen , doors eh have decent spares roof ok gurads need fixing , thats why vicelores one is the $$ it is as its clean og clean , its the sum of its parts pretty much if i were to wreck it

Thanks mate, I will keep it in mind. However might be to big of a project for me.

Cheers Paul

Major wrote:

Klaus wrote:its a type 3 🙂 enough said ha ha , pan needs work sills need work below front screen lower sides of rear screen , doors eh have decent spares roof ok gurads need fixing , thats why vicelores one is the $$ it is as its clean og clean , its the sum of its parts pretty much if i were to wreck it

Thanks mate, I will keep it in mind. However might be to big of a project for me.

Cheers Paul

anything in your budget is going to be a big project

without a base you have no project ..try building a splitty a fkd one is 3-5grand .but were happy to pay 🙂

dragsters for life wrote:

Major wrote:

Klaus wrote:its a type 3 🙂 enough said ha ha , pan needs work sills need work below front screen lower sides of rear screen , doors eh have decent spares roof ok gurads need fixing , thats why vicelores one is the $$ it is as its clean og clean , its the sum of its parts pretty much if i were to wreck it

Thanks mate, I will keep it in mind. However might be to big of a project for me.

Cheers Paul

anything in your budget is going to be a big project

I am starting to realise that now. I suppose there is nothing like a challenge though! 😂

Klaus wrote:without a base you have no project ..try building a splitty a fkd one is 3-5grand .but were happy to pay 🙂

So very true mate!

Haven't ruled your car out completely. The great thing with yours is it is all there. Just need to weigh up my options and work out what is best for me.

Cheers Paul

I'm building a 61 dc starting with this

Klaus wrote:I'm building a 61 dc starting with this

😂😂😂

not funny 🙂 it hurts my brain but good fun