anyone used these shims?
http://www.spcperformance.com/index.php?option=com_spc&task=part_description&pid=75200
tweety ·
Aussieveedubbers · Tech Talk
Camber toe shims
https://forums.aussieveedubbers.com/threads/95544/camber-toe-shims
psimitar ·
Even as the advert says, don't forget to check that the spindles bearings can accept the modified camber and toe.
As I said in your other thread, if the bearing does not have the play to allow for a variation in angle of operation then you will need the bearing housing machined to the new plane of operation or cutting and rewelding the arm to the new angles 🙂
It is a nice product tho.
As I said in your other thread, if the bearing does not have the play to allow for a variation in angle of operation then you will need the bearing housing machined to the new plane of operation or cutting and rewelding the arm to the new angles 🙂
It is a nice product tho.