Aussieveedubbers · Tech Talk

Engine rebuild problem?

https://forums.aussieveedubbers.com/threads/97854/engine-rebuild-problem

telf · 15 Jul 2012, 8:04 pm

Hi all I'm putting me engine back together.
Im in the midst of putting the pistons on and have got a problem. Ive got new con rods and 1 of the tubes that go through the little end holding the piston on will not go through as its super tight any ideas? thanks telf

waveman1500 · 15 Jul 2012, 8:18 pm

Measure both the pin and the con-rod little end with a vernier caliper and check that they are both in spec.